09-03-2012, 06:43 PM
|
#1 |
|
Join Date: Jun 2007
Location: y
Posts: 28
|
On board air set - York Compressor and 4.2 brackets
York compressor and brackets for 4.2 I-6 brackets
York comp #'s on metal tag No. M 582778 Pt. AMC 5461585 Navistar Comp #'s on metal tag (Navistar is for International Trucks) No. A 2052077 Pt. 2000820-091 Bracket bolted to the compressor P/N 3230389 Cast Alum brkt 3242191 Small slot brkt 3238456 large bracket and pulley have no visible part #s on them Both compressors turn free, and the York has reusable fitting on the top so that saves you $ you don't have to buy fittings. I don't think the Navistar compressor has ever been use and all the mounting holes look identical to the York. I bought this used and never installed it so I cant tell you any more about it than what you see. $120 for York and all brackets $40 for Navistar compressor only. Thanks (937) 658-4704 I am looking for a CJ PSC steering box drilled for Hydro assist, lines and a remote resivour those are the only thing I will trade for. Last edited by U-Jt.Snapper; 09-03-2012 at 06:49 PM. Reason: trade updated |
|
|
|
09-03-2012, 06:47 PM
|
#2 |
|
Join Date: Jun 2007
Location: y
Posts: 28
|
pics
Other pics
|
|
|
|
|
09-18-2012, 10:40 PM
|
#3 |
|
Join Date: Jun 2007
Location: y
Posts: 28
|
comp
$100 for all listed above....
Better off to call or text than post reply. I'm also planning on going to the swap meet at Cleves in Oct 937 658 4704 |
|
|
|
|
09-21-2012, 06:13 AM
|
#5 |
|
Join Date: Jun 2007
Location: y
Posts: 28
|
..
Magnet works when energized, but doesn't release....I'm not sure but the pulley bearing may be froze. Called Carquest and you can buy the pulley bearing only from them. They had 2 different grades listed one was $33 and one was $75.
I replaced only the bearing on the A/C comp in my Dakota and works great and saved a bunch of $. Carquest was the only place that I could find them listed individualy. Just a tip for all you DIY'ers |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
