U&K metal works cnc plasma services - Page 2

u&k metal works · 04-02-2013, 06:27 AM

Yep it's true I'm still hard at it cutting parts I'm sorry to say I won't be making the journey to cleves this spring do to work but feel free to call or message me for whatever you may need I plan on attending the fall swap meet with all of my wears and some new products to show off thanks!

Jonesy · 03-09-2015, 04:56 PM

You have a fire extinguisher drawn up? Was wanting a few for me an buddies to mount the bottles a little safer. Drew up my own simple one. Mind giving me a quote for a weld together kit?

onepieceatatime · 03-13-2015, 02:00 AM

Quote:

Originally Posted by Jonesy

You have a fire extinguisher drawn up? Was wanting a few for me an buddies to mount the bottles a little safer. Drew up my own simple one. Mind giving me a quote for a weld together kit?

There's a guy on Hardline that sell that same thing for $25 with all the hardware.

jeepmanjeff · 04-23-2015, 03:49 PM

Do you have brackets for a Disc conversion kit for a Chevy Corporate 14 bolt?

Also looking for tabs for shackles install on custom bumper I am building. 1" thick and 1" diameter hole.

u&k metal works · 04-26-2015, 08:32 PM

Sorry for the delay folks I've moved and I am currently working on wiring my shop so I can get back to cutting and fabing some parts I'll keep you posted when I'm up and going full swing

JasperJeep · 09-12-2015, 11:27 AM

That Zack is a cutting machine. Ordered my battery box, quart and gallon carriers. Bad ass.

GT MOTORSPORTS · 10-27-2015, 10:36 AM

how clean accurate are the holes? I had some brackets cut from another place and the holes always need cleaned up with a drill.

u&k metal works · 10-29-2015, 08:39 AM

Holes are very accurate I check each part for QA before it leaves the shop if a hole needs cleaned up I do it before it goes out

Sent from my iPhone using Tapatalk

03-09-2015, 04:56 PM	#27
Jonesy Join Date: Dec 2010 Location: Piner, KY Posts: 141	You have a fire extinguisher drawn up? Was wanting a few for me an buddies to mount the bottles a little safer. Drew up my own simple one. Mind giving me a quote for a weld together kit? Attached Thumbnails __________________ JT Jones 83 Toyota - beater 87 Toyota Truggy

04-23-2015, 03:49 PM	#29
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Disc conversion for Corporate 14 Do you have brackets for a Disc conversion kit for a Chevy Corporate 14 bolt? Also looking for tabs for shackles install on custom bumper I am building. 1" thick and 1" diameter hole. __________________ Keep them on all 4's

10-27-2015, 10:36 AM	#32
GT MOTORSPORTS Custom fabrication Join Date: May 2009 Location: Lynchburg,Ohio Posts: 92	how clean accurate are the holes? I had some brackets cut from another place and the holes always need cleaned up with a drill. __________________ Regret not what you've done,Only what you have'nt.

04-02-2013, 06:27 AM	#26
u&k metal works Join Date: Oct 2011 Posts: 116	Yep it's true I'm still hard at it cutting parts I'm sorry to say I won't be making the journey to cleves this spring do to work but feel free to call or message me for whatever you may need I plan on attending the fall swap meet with all of my wears and some new products to show off thanks!

04-26-2015, 08:32 PM	#30
u&k metal works Join Date: Oct 2011 Posts: 116	Sorry for the delay folks I've moved and I am currently working on wiring my shop so I can get back to cutting and fabing some parts I'll keep you posted when I'm up and going full swing

09-12-2015, 11:27 AM	#31
JasperJeep Join Date: Sep 2014 Posts: 25	That Zack is a cutting machine. Ordered my battery box, quart and gallon carriers. Bad ass.

10-29-2015, 08:39 AM	#33
u&k metal works Join Date: Oct 2011 Posts: 116	Holes are very accurate I check each part for QA before it leaves the shop if a hole needs cleaned up I do it before it goes out Sent from my iPhone using Tapatalk