Zach’s buggy build

jeepmanjeff · 09-10-2018, 11:43 PM

Started designing the new buggy for Zach. Upgraded my Bendtech to Pro today!

Sent from my iPhone using Tapatalk

93 Krawler · 09-12-2018, 08:06 AM

I wish I could've used that on my exo. Not knowing the angles would be an issue.

Sent from my SM-G930V using Tapatalk

bbtank45 · 09-12-2018, 02:51 PM

Looking good. Is the red salvaged CJ frame?....If so, id think about starting with fresh tube! Just my .02

Smiddy24 · 09-12-2018, 04:53 PM

Quote:

Originally Posted by bbtank45

Looking good. Is the red salvaged CJ frame?....If so, id think about starting with fresh tube! Just my .02

Nope! It's the new box frame we are making. The old CJ7 frame was cracked and rusting out.

bbtank45 · 09-13-2018, 08:57 AM

Good call, look forward to seeing progress

jeepmanjeff · 09-13-2018, 12:58 PM

Picked up ALL the steel today from Industrial Tube and Steel. highly recommend them. I called 2 other steel places and tubing is over $7 per foot for 1.75x120 wall. They sold it to me for $3.67!

Brody is bringing me I-Beams for a Jig I am going to build for frames and then we will be off to the races!

jeepmanjeff · 09-13-2018, 01:00 PM

There will be more tubing in the front section as well

93 Krawler · 09-13-2018, 03:45 PM

Quote:

Originally Posted by jeepmanjeff

Picked up ALL the steel today from Industrial Tube and Steel. highly recommend them. I called 2 other steel places and tubing is over $7 per foot for 1.75x120 wall. They sold it to me for $3.67!

That is a good price. Did you call Hirschberg Steel? It was $3.85 per foot with tax when I bought all that tube. A lot of places rip off the public.

WrenchMonkey · 09-13-2018, 04:20 PM

Nice! I like it...

Looking at the S-curves at the rear of the box frame, are those needed for clearance? Or to mount something? They might be simpler and stronger if you just bent one 45 and straight down to the crossmember...

jeepmanjeff · 09-13-2018, 04:23 PM

Simply to be different

Sent from my iPhone using Tapatalk

barnhartal · 09-18-2018, 10:53 AM

If your planning on a future rear seat, push those s curves back as far as rear upper link clearance will allow. Mine has similar curves and when I put rear floor in for kids it kind of screwed them for footwell. Livable but not great.

Smiddy24 · 09-26-2018, 03:20 PM

New clear ORI’s are in and they are sharp!!

Sent from my iPhone using Tapatalk

93 Krawler · 09-26-2018, 09:31 PM

So Shiny

Sent from my S7 using Tapatalk

Smiddy24 · 09-27-2018, 08:00 AM

Quote:

Originally Posted by barnhartal

If your planning on a future rear seat, push those s curves back as far as rear upper link clearance will allow. Mine has similar curves and when I put rear floor in for kids it kind of screwed them for footwell. Livable but not great.

That may be an adjustment we make once we get started on the rear section of the chassis.

Smiddy24 · 09-27-2018, 08:01 AM

Quote:

Originally Posted by 93 Krawler

So Shiny

Sent from my S7 using Tapatalk

Oh I know! They'll look sharp on the jeep-buggy.

Smiddy24 · 10-01-2018, 11:13 AM

Old Jeep frame is gone.. it’s been a great ride, but onto better things! Only thing that’s left to sell if the fiberglass tub!

Sent from my iPhone using Tapatalk

Smiddy24 · 10-17-2018, 11:06 AM

The people that were at Harlan convinced me to go automatic.. so I ended up getting a TH400. Now looking for an LS because why not upgrade right?!?

Sent from my iPhone using Tapatalk

93 Krawler · 10-17-2018, 08:11 PM

Quote:

Originally Posted by Smiddy24

The people that were at Harlan convinced me to go automatic.. so I ended up getting a TH400. Now looking for an LS because why not upgrade right?!?

Sent from my iPhone using Tapatalk

You will not regret going to an automatic. Now all you got to do is point and shoot.

Sent from my S7 using Tapatalk

Smiddy24 · 10-25-2018, 03:30 PM

Oh major upgrade here! ATLAS T CASE!

She’s a little old. From what we are told it’s never been installed. Atlas is either a late 90’s model or early 2000’s

Sent from my iPhone using Tapatalk

blazerbrad · 10-26-2018, 08:23 AM

Quote:

Originally Posted by Smiddy24

Oh major upgrade here! ATLAS T CASE!

She’s a little old. From what we are told it’s never been installed. Atlas is either a late 90’s model or early 2000’s

Sent from my iPhone using Tapatalk

Is that a 3.8:1 low range version (looks like a 3.8 written on it)? Should work pretty good with the TH400. I was thinking originally that if you went with the TH400 but kept the NP205 you may not be happy because that combo gives pretty crappy low range ratio.

Smiddy24 · 10-26-2018, 10:14 AM

Quote:

Originally Posted by blazerbrad

Is that a 3.8:1 low range version (looks like a 3.8 written on it)? Should work pretty good with the TH400. I was thinking originally that if you went with the TH400 but kept the NP205 you may not be happy because that combo gives pretty crappy low range ratio.

That it is! Very pumped because of the stress I was going through in buying the adapter. Then buying more parts to either do the doubler or the gear box. So my dad made a very good point.. instead of paying $1500 for either the doubler/gear box why not just try to find a Atlas for only $300-500 more. But yeah this solves all my problems with finding a better gear ratio. Paid $1800 for it. So it's a steal because that includes the twin sticks, the TH400 adapter, and possibly a shifter for the TH400 instead of buying a Winters shifter.

My dad is going down to get it this Sunday since it's located in Georgia and he's traveling to New Orleans for work. He is also buying another TH400 with a reverse valve body. So we have an extra TH400 in the garage now that needs to be sold. Plus I'm selling my old 205 and the 203 I just got.

Smiddy24 · 10-27-2018, 08:29 PM

Decent amount of progress made today! Got both axles put together (4links and 14 bolt gears). We also made the base of the frame, thanks to my dad Jeffrey Smith and his skills with the plasma cutter!

Sent from my iPhone using Tapatalk

Smiddy24 · 11-05-2018, 10:05 AM

Some goodies arrived today. Got my brake pedals and brake master cylinders. This allows me to have independent brakes!

Sent from my iPhone using Tapatalk

Smiddy24 · 11-05-2018, 06:35 PM

And some more goodies! TH400 shifter and the twin sticks for the Atlas

Sent from my iPhone using Tapatalk

Smiddy24 · 11-08-2018, 08:42 PM

While I’ve been doing college essays all week (stupid last semester) my dad decided to work on the frame. He got a lot done! Looks very good!

Sent from my iPhone using Tapatalk

09-10-2018, 11:43 PM	#1
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Zach’s buggy build Started designing the new buggy for Zach. Upgraded my Bendtech to Pro today! Sent from my iPhone using Tapatalk __________________ Keep them on all 4's

09-12-2018, 02:51 PM	#3
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Looking good. Is the red salvaged CJ frame?....If so, id think about starting with fresh tube! Just my .02 __________________ 1985 4runner "Redneck Gigalo"

09-13-2018, 08:57 AM	#5
bbtank45 Join Date: Sep 2011 Location: Ross, OH Posts: 200	Good call, look forward to seeing progress __________________ 1985 4runner "Redneck Gigalo"

09-13-2018, 01:00 PM	#7
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Pic There will be more tubing in the front section as well __________________ Keep them on all 4's

09-13-2018, 04:20 PM	#9
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Nice! I like it... Looking at the S-curves at the rear of the box frame, are those needed for clearance? Or to mount something? They might be simpler and stronger if you just bent one 45 and straight down to the crossmember... Attached Thumbnails __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

09-12-2018, 08:06 AM	#2
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I wish I could've used that on my exo. Not knowing the angles would be an issue. Sent from my SM-G930V using Tapatalk

09-13-2018, 04:23 PM	#10
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Simply to be different Sent from my iPhone using Tapatalk __________________ Keep them on all 4's

09-18-2018, 10:53 AM	#11
barnhartal - CORE Member - Join Date: Jan 2012 Location: Swanton Ohio Posts: 20	If your planning on a future rear seat, push those s curves back as far as rear upper link clearance will allow. Mine has similar curves and when I put rear floor in for kids it kind of screwed them for footwell. Livable but not great.

09-26-2018, 03:20 PM	#12
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	New clear ORI’s are in and they are sharp!! Sent from my iPhone using Tapatalk __________________ You got it"

09-26-2018, 09:31 PM	#13
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	So Shiny Sent from my S7 using Tapatalk

10-01-2018, 11:13 AM	#16
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	Old Jeep frame is gone.. it’s been a great ride, but onto better things! Only thing that’s left to sell if the fiberglass tub! Sent from my iPhone using Tapatalk __________________ You got it"

10-17-2018, 11:06 AM	#17
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	The people that were at Harlan convinced me to go automatic.. so I ended up getting a TH400. Now looking for an LS because why not upgrade right?!? Sent from my iPhone using Tapatalk __________________ You got it"

10-25-2018, 03:30 PM	#19
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	Oh major upgrade here! ATLAS T CASE! She’s a little old. From what we are told it’s never been installed. Atlas is either a late 90’s model or early 2000’s Sent from my iPhone using Tapatalk __________________ You got it"

10-27-2018, 08:29 PM	#22
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	Decent amount of progress made today! Got both axles put together (4links and 14 bolt gears). We also made the base of the frame, thanks to my dad Jeffrey Smith and his skills with the plasma cutter! Sent from my iPhone using Tapatalk __________________ You got it"

11-05-2018, 10:05 AM	#23
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	Some goodies arrived today. Got my brake pedals and brake master cylinders. This allows me to have independent brakes! Sent from my iPhone using Tapatalk __________________ You got it"

11-05-2018, 06:35 PM	#24
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	And some more goodies! TH400 shifter and the twin sticks for the Atlas Sent from my iPhone using Tapatalk __________________ You got it"

11-08-2018, 08:42 PM	#25
Smiddy24 2019 Custom CJ7 Buggy - CORE Member - Join Date: Dec 2015 Location: Fairfield, Ohio Posts: 448 Images: 72	While I’ve been doing college essays all week (stupid last semester) my dad decided to work on the frame. He got a lot done! Looks very good! Sent from my iPhone using Tapatalk __________________ You got it"