Wanted, ring and pinion install

WrenchMonkey · 01-31-2019, 08:10 PM

So, the guy I used last fall doesn't have room in his garage for the whole jeep, and my back isn't letting me pull the axle to take to him. So, I'm looking for other options.

I know several here have set their own. Anybody with more time on their hands than cash, looking for a side job?

456s into the HP D30 in my 97 XJ. Shafts are already pulled, and 99% of the Haspin mud has been relocated to my driveway...

93 Krawler · 01-31-2019, 08:56 PM

I'd help ya out but i have no room or time.

Sent from my S7 using Tapatalk

Runoveru2 · 01-31-2019, 09:46 PM

So is the jeep in your garage on stands with the axles pulled ?

WrenchMonkey · 02-01-2019, 01:34 AM

Quote:

Originally Posted by 93 Krawler

I'd help ya out but i have no room or time.

I appreciate it. I think that's where everybody is at, busy with winter builds...

Quote:

Originally Posted by Runoveru2

So is the jeep in your garage on stands with the axles pulled ?

I pulled the axle shafts out, then reassembled everything with just the outer axle stubs, so I could drive it without rotating the R&P. So it is still driving, and the shafts are out of the way to be able to get the carrier out.

Sunday and Monday are looking nice. I'll see if this Bryan guy is willing to do it in his driveway...

WrenchMonkey · 03-04-2019, 09:37 PM

If anybody is also looking, I ended up taking it to Tim Blair, at Blair's Garage up in Lebanon.

He definitely seemed to know his stuff, and the results show it. Jeep drives better than it has in a very long time.

I can't say what he normally charges, I managed to get the friend-of-a-friend discount. (Thanks again Zach!) But I can say that he did great work for me, and I couldn't be happier.

blazerbrad · 03-05-2019, 07:30 AM

That place always has a bunch of interesting rigs sitting in the lot.

01-31-2019, 08:10 PM	#1
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Wanted, ring and pinion install So, the guy I used last fall doesn't have room in his garage for the whole jeep, and my back isn't letting me pull the axle to take to him. So, I'm looking for other options. I know several here have set their own. Anybody with more time on their hands than cash, looking for a side job? 456s into the HP D30 in my 97 XJ. Shafts are already pulled, and 99% of the Haspin mud has been relocated to my driveway... __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

01-31-2019, 09:46 PM	#3
Runoveru2 Adrenaline Junkie - CORE Member - - Moderator - Join Date: Jun 2011 Location: Hamilton, Ohio Posts: 702 Images: 168	So is the jeep in your garage on stands with the axles pulled ? __________________ No need for a Winch...You just have to make it !!

03-04-2019, 09:37 PM	#5
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	If anybody is also looking, I ended up taking it to Tim Blair, at Blair's Garage up in Lebanon. He definitely seemed to know his stuff, and the results show it. Jeep drives better than it has in a very long time. I can't say what he normally charges, I managed to get the friend-of-a-friend discount. (Thanks again Zach!) But I can say that he did great work for me, and I couldn't be happier. __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

01-31-2019, 08:56 PM	#2
93 Krawler >>>PMC<<< - CORE Member - - Administrator - Join Date: Sep 2010 Location: Ross, OH Posts: 2,069 Images: 1268	I'd help ya out but i have no room or time. Sent from my S7 using Tapatalk

03-05-2019, 07:30 AM	#6
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	That place always has a bunch of interesting rigs sitting in the lot.