11-18-2013, 06:37 AM
|
#1 |
Join Date: Dec 2010
Location: Piner, KY
Posts: 141
|
School me on Ford 9"'s
Looking at maybe swapping a 9" into my toyota truggy. I know almost nothing about these axles though. What do I need to look for? I know the aftermarket is huge for them, and parts are relatively cheap.
__________________
JT Jones 83 Toyota - beater 87 Toyota Truggy |
|
|
|
11-18-2013, 09:17 AM
|
#2 | |
|
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
Quote:
pros extensive amount of parts and gear choices pinion guards are offered for it like the 14 b cons wont have the clearance the Toyota diff has its a ford(humpy) theres a bigger list just the first couple could come up with
__________________
One of these days Zuk 2.0 Last edited by Flxratd; 11-18-2013 at 12:16 PM. |
|
|
|
|
|
11-18-2013, 11:32 AM
|
#3 |
|
Join Date: Sep 2008
Posts: 573
|
It comes out of a ford ... It. Has. 9" ring gear I think...,
That's all I got
__________________
S10 with a few air shocks.. 
|
|
|
|
|
11-18-2013, 11:43 AM
|
#4 | |
|
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
Quote:
__________________
One of these days Zuk 2.0 |
|
|
|
|
|
11-18-2013, 12:11 PM
|
#6 | |
|
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
Quote:
__________________
One of these days Zuk 2.0 |
|
|
|
|
|
11-18-2013, 07:20 PM
|
#7 |
|
Join Date: Jan 2007
Posts: 88
|
look at currie enterprises the rear they sell is one type of housing and the
front one for jeeps is another . I have one of each if you want to put it next to yours to decide what you want. Shawn |
|
|
|
|
11-18-2013, 09:37 PM
|
#8 |
|
Join Date: Apr 2012
Location: Circleville Ohio
Posts: 61
|
I have a 609 in the front of my jeep. really nice set-up and the R&P is strong with the third bearing on the pinion, better ground clearance than a Dana 44. downside is the really low pinion and the high cost of a true high 9 center section.
__________________
1976 CJ 5 1984 CJ 7 1993 K3500 GMC 6.5 TD |
|
|
|
 |
|
|
Linear Mode
