Announcement

Collapse
No announcement yet.

Propane question

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    If it keeps going into open loop that could definitely cause it to run rich...basically like having the choke on. Probably wouldn't be a bad idea to go ahead and do the 4 wire heated O2 sensor also.

    Do you know what type of fuel pressure you are getting?

    Comment


    • #17
      Kevin I would put a hotter Thermostat in it, sounds like computer thinks it's not warm enough so it's running rich.
      No need for a Winch...You just have to make it !!

      Comment


      • #18
        Originally posted by blazerbrad View Post
        If it keeps going into open loop that could definitely cause it to run rich...basically like having the choke on. Probably wouldn't be a bad idea to go ahead and do the 4 wire heated O2 sensor also.

        Do you know what type of fuel pressure you are getting?
        I don't remember the numbers, but they were within Edelbrocks specs.

        Originally posted by Runoveru2 View Post
        Kevin I would put a hotter Thermostat in it, sounds like computer thinks it's not warm enough so it's running rich.
        Edelbrock says to use a 195 stat for best performance. Maybe the multi-port is pickier than the TBI was. The TBI ran ok with the 180 in it.

        Comment

        Working...
        X