I hear that you can get custom shock mounting tabs, is this true? If so do you have any that would work for an inverted shock system? Thanks! :)
Announcement
Collapse
No announcement yet.
Carwash
Collapse
X
-
-
I'am looking to do a set up like this. Do you have any mounts that would work?
http://home.4x4wire.com/adamf/88/ima...shockmount.jpg'84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage
Comment
-
nah, the bolt thing is a bad idea, it's only single shear,and will break fairly easy... here is what you need.
the pic isnt the best, but you get the idea... it makes the shock eye sit opposed to the axle tube...
http://www.complete4x4.com/catalog/p...roducts_id=144
Comment
-
Those look great! That should work. Now do you have anything like that top bracket in the pic?
If i wanted to purchase those should I do it through your website?'84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage
Comment
-
-
Originally posted by Hybrid View PostThose look great! That should work. Now do you have anything like that top bracket in the pic?
If i wanted to purchase those should I do it through your website?
If you want those, hit me with a pm... i can have them for you in a few days. Don't have them on the shelf.
Comment
-
In order to get this thread properly off-topic I would like to enquire about some d-ring/shackle mounts for bumper construction. Not just weld on the face of the bumper, but the kind that goes all the way thru the bumper & welds at least on the front/back. Make sense?
Comment
-
Comment
Comment