For the exhaust I bought a few mandrel bent 2.5" fittings from Summit Racing.
I had to cross over to the passenger side to keep the heat away from the tcase and fuel lines on the driver side. I used a u pipe to make a y pipe and ran 2 into 1 down the passenger side. All in all it wasn't too bad to do. I did have to buy a set of aftermarket manifolds so the driver pipe didn't exit on my link bar. I used a band clamp so I can separate it in 2 pieces for easy removal from the rig.
![Click image for larger version
Name: 20190731_204412.jpg
Views: 1
Size: 118.9 KB
ID: 74836](filedata/fetch?id=74836&d=1578530529)
![Click image for larger version
Name: 20190731_205052.jpg
Views: 1
Size: 49.8 KB
ID: 74841](filedata/fetch?id=74841&d=1578530529)
![Click image for larger version
Name: 20190731_203959.jpg
Views: 1
Size: 60.4 KB
ID: 74839](filedata/fetch?id=74839&d=1578530529)
![Click image for larger version
Name: 20190731_204011.jpg
Views: 1
Size: 85.9 KB
ID: 74837](filedata/fetch?id=74837&d=1578530529)
![Click image for larger version
Name: 20190731_204023.jpg
Views: 1
Size: 65.5 KB
ID: 74840](filedata/fetch?id=74840&d=1578530529)
I had to cross over to the passenger side to keep the heat away from the tcase and fuel lines on the driver side. I used a u pipe to make a y pipe and ran 2 into 1 down the passenger side. All in all it wasn't too bad to do. I did have to buy a set of aftermarket manifolds so the driver pipe didn't exit on my link bar. I used a band clamp so I can separate it in 2 pieces for easy removal from the rig.
Comment