C.O.R.E. FORUM - axle swap

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)

- Tech and How-To (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=3)

- - axle swap (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=1028)

84cj-7-3/4

10-08-2007 04:08 PM

axle swap

i have a 84 cj-7 i'm installing a set of 1982 3/4 ton chevy axles, whats some of the things i need to do to properly do this swap? thanks 84cj-7-3/4

JET455

10-08-2007 04:12 PM

You need to outboard your front spring hangers to match the chevys width. There are kits out there for this by poison spyder etc.. or do your own. And on the rear you can just change the spring perches to match the rear springs.

84cj-7-3/4

10-08-2007 04:45 PM

axle swap

thanks i did make my own for the front and i'm now working on the rear, just wasn't sure if thats all that needed to be done. I'm also droppin in a 327 and a 700r4 trans will the stock leave springs hold up. It had a 4 cyclinder when i first got it.

scarface

10-08-2007 04:58 PM

might as well stretch the wb while your doin all that work

94Dodge Truggy

10-08-2007 06:11 PM

Are you going to have plenty of gearing with the auto and larger tire setup?

All times are GMT -4. The time now is 03:41 PM.