C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   General Discussions (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=17)
-   -   Rock rings (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=11948)

jeepmanjeff 04-19-2017 07:15 PM
Rock rings
 
Got my rock rings today from Trailworthy FAB!

Saweet! Hopefully no more broken valve stems again!

https://uploads.tapatalk-cdn.com/201...45a7358499.jpg


Sent from my iPhone using Tapatalk

WrenchMonkey 04-19-2017 10:05 PM
Nice!

Just looking at pics... So these are for your fronts (hummer wheels with internal beadlocks?), and the rears are conventional?

jeepmanjeff 04-20-2017 09:06 AM
both front and rear

WrenchMonkey 04-20-2017 03:42 PM
1 Attachment(s)
So it's going over the beadlock ring? Sorry, I guess I don't understand...

WrenchMonkey 04-20-2017 06:26 PM
Quote:
Originally Posted by Waffle (Post 87984)
...The existing beadlock ring is recessed on H1 wheels....
Ah, I see now, that's the part I was missing. Thanks!

jeepmanjeff 04-21-2017 07:20 PM
Working on the jeep tonight. Got the tranny pulled and the upper control Y arm removed. The 9/16 bolt was seized to the johnie joint and I had to torch it out. Solid 1 1/2 thick with the ball joint and the bolt. Going to replace it with a 1 1/2 heim. New clutch installed with new hydro setup. Rock rings are going to look sick. https://uploads.tapatalk-cdn.com/201...1399507c47.jpghttps://uploads.tapatalk-cdn.com/201...b8b1e35a90.jpghttps://uploads.tapatalk-cdn.com/201...17a6ba3af2.jpghttps://uploads.tapatalk-cdn.com/201...9fe9e8b226.jpghttps://uploads.tapatalk-cdn.com/201...23d9307f32.jpg


Sent from my iPhone using Tapatalk


All times are GMT -4. The time now is 12:21 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.