Rock rings

jeepmanjeff · 04-19-2017, 07:15 PM

Got my rock rings today from Trailworthy FAB!

Saweet! Hopefully no more broken valve stems again!

Sent from my iPhone using Tapatalk

WrenchMonkey · 04-19-2017, 10:05 PM

Nice!

Just looking at pics... So these are for your fronts (hummer wheels with internal beadlocks?), and the rears are conventional?

jeepmanjeff · 04-20-2017, 09:06 AM

both front and rear

WrenchMonkey · 04-20-2017, 03:42 PM

So it's going over the beadlock ring? Sorry, I guess I don't understand...

WrenchMonkey · 04-20-2017, 06:26 PM

Quote:

Originally Posted by Waffle

...The existing beadlock ring is recessed on H1 wheels....

Ah, I see now, that's the part I was missing. Thanks!

jeepmanjeff · 04-21-2017, 07:20 PM

Working on the jeep tonight. Got the tranny pulled and the upper control Y arm removed. The 9/16 bolt was seized to the johnie joint and I had to torch it out. Solid 1 1/2 thick with the ball joint and the bolt. Going to replace it with a 1 1/2 heim. New clutch installed with new hydro setup. Rock rings are going to look sick.

Sent from my iPhone using Tapatalk

04-19-2017, 07:15 PM	#1
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Rock rings Got my rock rings today from Trailworthy FAB! Saweet! Hopefully no more broken valve stems again! Sent from my iPhone using Tapatalk __________________ Keep them on all 4's

04-19-2017, 10:05 PM	#2
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Nice! Just looking at pics... So these are for your fronts (hummer wheels with internal beadlocks?), and the rears are conventional? __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

04-20-2017, 09:06 AM	#3
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	both front and rear __________________ Keep them on all 4's

04-20-2017, 03:42 PM	#4
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	So it's going over the beadlock ring? Sorry, I guess I don't understand... Attached Images __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

04-21-2017, 07:20 PM	#6
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Working on the jeep tonight. Got the tranny pulled and the upper control Y arm removed. The 9/16 bolt was seized to the johnie joint and I had to torch it out. Solid 1 1/2 thick with the ball joint and the bolt. Going to replace it with a 1 1/2 heim. New clutch installed with new hydro setup. Rock rings are going to look sick. Sent from my iPhone using Tapatalk __________________ Keep them on all 4's