C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   Tech and How-To (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=3)
-   -   sammi wiper motor. (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=4417)

fordman00 12-27-2009 03:16 PM

sammi wiper motor.
 
Hey guys, i have an 88' sammi and the wipers arent working i replaced the wiper motor with a reman. one, didnt work. i need some ideas why this aint working?

thanks,
adam

hotrod 12-27-2009 04:17 PM

Are you getting power to the motor? blown fuse maybe? bad switch?

fordman00 12-27-2009 05:58 PM

im getting powers to the motor.and good fuses. i dont know how to check the switch though.

94Dodge Truggy 12-27-2009 11:01 PM

smack it with a hammer while turning it off and on.

hotrod 12-28-2009 01:43 AM

Quote:

Originally Posted by 94Dodge Truggy (Post 31943)
smack it with a hammer while turning it off and on.

and if that doesnt work, get a bigger hammer :evilgrin:

fordman00 12-28-2009 03:15 PM

lol.ok.it should work though its a remanufactured one rfrom oreily.

hotrod 12-28-2009 04:12 PM

Quote:

Originally Posted by fordman00 (Post 31968)
lol.ok.it should work though its a remanufactured one rfrom oreily.

your right it should.
check it with a DVOM. each time you turn the switch up there should be less resistance than the position before. maybe your getting power enough to light a test light but not enough to run the motor.

fabricator 12-28-2009 04:25 PM

just hook to motor up to the battery and see if it comes on or not

fordman00 12-28-2009 05:20 PM

what do i use to hook the motor up to the battery?

hotrod 12-28-2009 07:07 PM

just use extra wire you might have laying around run one to a positive and one to the negative

fordman00 12-28-2009 08:24 PM

ok.ill try that tommorow.i tested to make sure i was getting power to the motor again today and i was so i already called oreily and there getting a new motor wednesday.so ill try that and go from there.thanks for all your help i ll keep you posted.

tinbeater 12-28-2009 11:34 PM

Quote:

Originally Posted by fordman00 (Post 31988)
ok.ill try that tommorow.i tested to make sure i was getting power to the motor again today and i was so i already called oreily and there getting a new motor wednesday.so ill try that and go from there.thanks for all your help i ll keep you posted.

Make sure its mounted with a good ground from the windshield frame to the body, if not it aint goin work.


All times are GMT -4. The time now is 02:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.