C.O.R.E. FORUM

C.O.R.E. FORUM (https://www.cincyoffroad.com/forumOLDVB3/index.php)
-   Tech and How-To (https://www.cincyoffroad.com/forumOLDVB3/forumdisplay.php?f=3)
-   -   Bump StopS how to (https://www.cincyoffroad.com/forumOLDVB3/showthread.php?t=8719)

timido 04-21-2012 02:07 PM
Bump StopS how to
 
I got my tank and am back to setting up my 4 link. With Poly 4 link brackets the lower has a little triangulation. That little triangulation puts the lower arm into the frame rail when one side is stuffed and the other is at full droop. Is that when I should set my Bump stops with one wheel stuffed?

humpy 04-21-2012 03:49 PM
Quote:
Originally Posted by timido (Post 63687)
I got my tank and am back to setting up my 4 link. With Poly 4 link brackets the lower has a little triangulation. That little triangulation puts the lower arm into the frame rail when one side is stuffed and the other is at full droop. Is that when I should set my Bump stops with one wheel stuffed?
Front link?rear link? Pics? What type of link setup? I.e. Double triangulated? 3link with panhard? 4link with panhard?... U have not posted enough info for us to help

timido 04-21-2012 08:07 PM
4 link rear Upper Triangulated about 25 degrees each side the lowers are triangulated about 15 degrees No track bar. I will try to get some good pictures.


All times are GMT -4. The time now is 03:08 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.