Rockwell axle length

94Dodge Truggy · 01-07-2008, 10:05 AM

On the 2.5 ton rockwell axles I have a few questions. How do you make the rear and front axles the same width from wheel bolting flange to wheel bolting flange. Another is are they all 6.72 ratios? And I guess you can not rotate the pinion and count the revolutions of the wheel to get a gear ratio due to the top loader gearing. :confused:

carwash · 01-07-2008, 10:44 AM

They are all 6.72:1 and yes, you can still do the rotation trick even with them being top loaders.

To make the front match the rear, you flip the hubs of the front axle in so that they are on the way the rears are. The bearings are the same, aside from the width of them. it will all interchange just fine.

94Dodge Truggy · 01-07-2008, 12:12 PM

Thanks man! Just tore into em last night and I started getting second thoughts about using em due to some difficulties.

carwash · 01-07-2008, 12:17 PM

Quote:

Originally Posted by 94Dodge Truggy

Thanks man! Just tore into em last night and I started getting second thoughts about using em due to some difficulties.

There are some obstacles to overcome regarding them... They are definitely not as easy as throwing some 1-tons under there.

94Dodge Truggy · 01-07-2008, 02:30 PM

Quote:

Originally Posted by carwash

There are some obstacles to overcome regarding them... They are definitely not as easy as throwing some 1-tons under there.

I agree! I am finding them out as I go it seems. May order rims from US 6x6

fabricator · 01-09-2008, 12:36 AM

http://www.ouversonengineering.com/home
this site may be your friend

fabricator · 01-09-2008, 07:38 AM

Quote:

Originally Posted by 94Dodge Truggy

I agree! I am finding them out as I go it seems. May order rims from US 6x6

I personnally haven't dealt with them, but their reputation
leaves a lot to be desired

http://www.pirate4x4.com/forum/showt...ghlight=usa6x6

http://www.pirate4x4.com/forum/showt...ghlight=usa6x6

http://www.pirate4x4.com/forum/showt...ghlight=usa6x6

01-07-2008, 10:05 AM	#1
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Rockwell axle length On the 2.5 ton rockwell axles I have a few questions. How do you make the rear and front axles the same width from wheel bolting flange to wheel bolting flange. Another is are they all 6.72 ratios? And I guess you can not rotate the pinion and count the revolutions of the wheel to get a gear ratio due to the top loader gearing. :confused:

01-07-2008, 10:44 AM	#2
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	They are all 6.72:1 and yes, you can still do the rotation trick even with them being top loaders. To make the front match the rear, you flip the hubs of the front axle in so that they are on the way the rears are. The bearings are the same, aside from the width of them. it will all interchange just fine. __________________

01-09-2008, 12:36 AM	#6
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	http://www.ouversonengineering.com/home this site may be your friend __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-07-2008, 12:12 PM	#3
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Thanks man! Just tore into em last night and I started getting second thoughts about using em due to some difficulties.