Bump StopS how to

timido · 04-21-2012, 03:07 PM

I got my tank and am back to setting up my 4 link. With Poly 4 link brackets the lower has a little triangulation. That little triangulation puts the lower arm into the frame rail when one side is stuffed and the other is at full droop. Is that when I should set my Bump stops with one wheel stuffed?

humpy · 04-21-2012, 04:49 PM

Quote:

Originally Posted by timido

I got my tank and am back to setting up my 4 link. With Poly 4 link brackets the lower has a little triangulation. That little triangulation puts the lower arm into the frame rail when one side is stuffed and the other is at full droop. Is that when I should set my Bump stops with one wheel stuffed?

Front link?rear link? Pics? What type of link setup? I.e. Double triangulated? 3link with panhard? 4link with panhard?... U have not posted enough info for us to help

timido · 04-21-2012, 09:07 PM

4 link rear Upper Triangulated about 25 degrees each side the lowers are triangulated about 15 degrees No track bar. I will try to get some good pictures.

04-21-2012, 03:07 PM	#1
timido Student Driver Join Date: Oct 2011 Posts: 197	Bump StopS how to I got my tank and am back to setting up my 4 link. With Poly 4 link brackets the lower has a little triangulation. That little triangulation puts the lower arm into the frame rail when one side is stuffed and the other is at full droop. Is that when I should set my Bump stops with one wheel stuffed?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

04-21-2012, 09:07 PM	#3
timido Student Driver Join Date: Oct 2011 Posts: 197	4 link rear Upper Triangulated about 25 degrees each side the lowers are triangulated about 15 degrees No track bar. I will try to get some good pictures.