|
|
07-16-2008, 11:15 PM
|
#1 |
|
Join Date: Jan 2007
Posts: 88
|
Need measurement for tranny
I need the measurement on a cj with a model 300 transfercase.
what is the measurement to the center of the rear driveshaft ? mine is 26" inside width of frame and it is at about 11" from drivers side. I am trying to see if it should be directly centerd or if it is off set a few inchs. thank you. Shawn |
|
|
|
07-16-2008, 11:23 PM
|
#2 |
|
pimpin' IS easy
|
All the trannies i know measure at least 5'10" or taller... most with a size 12 heel as well.... wanna see some pics?
hahahhah, sorry shawn, but the thread title made me giggle... I have no tech to offer, i'm retarded.
__________________
|
|
|
|
|
07-17-2008, 12:09 AM
|
#3 |
|
Join Date: Jan 2007
Posts: 88
|
Yes I guess I should of used the full name off what I am looking for. But I am
just falling into the lazy ass typing ebonics. Shawn |
|
|
|
|
07-17-2008, 11:59 AM
|
#5 | |
|
Your wifes pimp!
Join Date: Jan 2007
Location: Everywhere!!!!!!
Posts: 548
 |
Quote:
You just love to get your high heels out don't you........ 
__________________
   if i am not currently offending you, i will be shortly. |
|
|
|
|
|
07-17-2008, 07:38 PM
|
#7 | |
|
Your wifes pimp!
Join Date: Jan 2007
Location: Everywhere!!!!!!
Posts: 548
|
Quote:
You have to pay for your parts somehow...........;)
__________________
if i am not currently offending you, i will be shortly. |
|
|
|
|
|
07-18-2008, 06:55 PM
|
#8 |
Join Date: Nov 2007
Location: Sidney, Ohio
Posts: 52
|
back on track...
I have a cj with a 258, chrysler auto transmission, and dana 300. At the output of the transfer case, I measure 32" inside the frame rails. From driver side inside frame is 15" and from passenger side inside frame is 17". It's offset just a bit to match the amc 20 rear axle. Hope this helps.
BiggDaddy |
|
|
|
 |
|
|
Hybrid Mode
