Need measurement for tranny

carwash · 07-17-2008, 11:41 AM

only when i know yer coming down to the house... special occasions only.

JET455 · 07-17-2008, 06:38 PM

Quote:

Originally Posted by carwash

only when i know yer coming down to the house... special occasions only.

You have to pay for your parts somehow...........;)

BiggDaddy · 07-18-2008, 05:55 PM

I have a cj with a 258, chrysler auto transmission, and dana 300. At the output of the transfer case, I measure 32" inside the frame rails. From driver side inside frame is 15" and from passenger side inside frame is 17". It's offset just a bit to match the amc 20 rear axle. Hope this helps.

BiggDaddy

07-17-2008, 11:41 AM	#1
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	only when i know yer coming down to the house... special occasions only. __________________

07-18-2008, 05:55 PM	#3
BiggDaddy Join Date: Nov 2007 Location: Sidney, Ohio Posts: 52	back on track... I have a cj with a 258, chrysler auto transmission, and dana 300. At the output of the transfer case, I measure 32" inside the frame rails. From driver side inside frame is 15" and from passenger side inside frame is 17". It's offset just a bit to match the amc 20 rear axle. Hope this helps. BiggDaddy