External fuel pump

xj-up · 03-04-2009, 09:08 PM

Hey,
Does anyone know of any affordable external fuel pumps for EFI.
I put a fuel cell in my XJ but, still need a fuel pump. I don't really need a high performance pump on a stock 4.0L.

Maybe somehow reuse stock pump in fuel cell.

GPER · 03-04-2009, 09:18 PM

Auto Zone has the Mr Gasket 12 electric fuel pumps for around 30 bucks. I was looking at the small one for a spare for my Polaris.

carwash · 03-04-2009, 10:03 PM

Find out the psi that you need and then buy yourself a good one. Tour summit online for one. Don't scrimp on it, buy a decent one or it will be crazy loud and fail on you. Problem with these pumps is that they do not hold up well to the bouncing and banging of offroading. I went thru a bunch when i had the holley pro-craption, then finally blew a good chunk on a nice one and never had another problem.

Nuts · 03-04-2009, 10:54 PM

Ford had an inline EFI pump. I think the part# is E2000. I had one sitting around I was going to use before I went BACK

to propane. I'll see if I can find it tomorrow.

*EDIT* Yep its an E2000, I just googled it and found this link for ya...

http://cjoffroad.com/forums/topic.asp?TOPIC_ID=16013

sarge · 03-04-2009, 11:49 PM

Or you could cut a hole in your cell and use your stock pump . This is what I did on the YJ and works great and the price was right.

Redriverranger · 03-05-2009, 06:31 AM

Quote:

Originally Posted by sarge

Or you could cut a hole in your cell and use your stock pump . This is what I did on the YJ and works great and the price was right.

This is my recomendation as well. Inline pumps suck unless they are gravity fed normally.

94Dodge Truggy · 03-05-2009, 07:32 AM

I used pumps from a 1992 ford bronco on custom setups and never had any problems. And you can go to any auto parts store and replace it.

carwash · 03-05-2009, 09:40 AM

Quote:

Originally Posted by 94Dodge Truggy

I used pumps from a 1992 ford bronco on custom setups and never had any problems. And you can go to any auto parts store and replace it.

Yes, this is a big deal as well, getting a pump that you can replace at a parts store.

xj-up · 03-05-2009, 11:19 AM

Thanks, Everyone for all the help.

I may try the E2000 pump. It is about $35. on ebay and offroad reviews seem to prove its reliable and somewhat quiet.

Later,

JET455 · 03-05-2009, 11:34 AM

Just make sure you have a pump that will deliver around 40 psi to avoid fuel starvation. your injectors are factory regulated at around 30-31 psi.

Nuts · 03-05-2009, 07:08 PM

I found mine, its pretty much brand new,30 bucks and I can drop it off at chris' house tonight or tomorrow...

xj-up · 03-05-2009, 09:25 PM

Cool, Thx Adam

mckeddie · 03-06-2009, 05:18 PM

the e2000 is the same one that truggy is talking about too, it is used on all small block ford trucks i believe. i had one mounted on my old jee as a backup to my factory pump, and have used them on lots of small block chevy swaps. never known one to go bad on teh trail, although i do keep my spare from the old jeep in my tool bag just in case someones does go bad.

Nuts · 03-07-2009, 10:20 PM

I gave Chris your pump today, and F.Y.I. it was putting 62.5 psi unregulated when i took it off just before halloween

xj-up · 03-08-2009, 12:57 PM

Cool, Thx. Adam

I have a Holley fuel regulator that should work.

Later,

03-04-2009, 09:08 PM	#1
xj-up Jeep XJ Join Date: Jul 2007 Location: Hamilton, Ohio Posts: 76	External fuel pump Hey, Does anyone know of any affordable external fuel pumps for EFI. I put a fuel cell in my XJ but, still need a fuel pump. I don't really need a high performance pump on a stock 4.0L. Maybe somehow reuse stock pump in fuel cell. __________________ 90' Jeep XJ Buggy - 5.5 custom lift, 33" TSL's, locked 01' Softail 01' Dodge Ram Cummins 3500 4X4 71' Dodge Challenger Shane

03-04-2009, 10:03 PM	#3
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Find out the psi that you need and then buy yourself a good one. Tour summit online for one. Don't scrimp on it, buy a decent one or it will be crazy loud and fail on you. Problem with these pumps is that they do not hold up well to the bouncing and banging of offroading. I went thru a bunch when i had the holley pro-craption, then finally blew a good chunk on a nice one and never had another problem. __________________

03-05-2009, 07:32 AM	#7
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I used pumps from a 1992 ford bronco on custom setups and never had any problems. And you can go to any auto parts store and replace it. __________________

03-05-2009, 11:19 AM	#9
xj-up Jeep XJ Join Date: Jul 2007 Location: Hamilton, Ohio Posts: 76	Thanks, Everyone for all the help. I may try the E2000 pump. It is about $35. on ebay and offroad reviews seem to prove its reliable and somewhat quiet. Later, __________________ 90' Jeep XJ Buggy - 5.5 custom lift, 33" TSL's, locked 01' Softail 01' Dodge Ram Cummins 3500 4X4 71' Dodge Challenger Shane

03-05-2009, 11:34 AM	#10
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	Just make sure you have a pump that will deliver around 40 psi to avoid fuel starvation. your injectors are factory regulated at around 30-31 psi. __________________ if i am not currently offending you, i will be shortly.

03-04-2009, 09:18 PM	#2
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	Auto Zone has the Mr Gasket 12 electric fuel pumps for around 30 bucks. I was looking at the small one for a spare for my Polaris.

03-04-2009, 10:54 PM	#4
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Ford had an inline EFI pump. I think the part# is E2000. I had one sitting around I was going to use before I went BACK to propane. I'll see if I can find it tomorrow. EDIT Yep its an E2000, I just googled it and found this link for ya... http://cjoffroad.com/forums/topic.asp?TOPIC_ID=16013

03-04-2009, 11:49 PM	#5
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Or you could cut a hole in your cell and use your stock pump . This is what I did on the YJ and works great and the price was right.

03-05-2009, 07:08 PM	#11
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I found mine, its pretty much brand new,30 bucks and I can drop it off at chris' house tonight or tomorrow...

03-05-2009, 09:25 PM	#12
xj-up Jeep XJ Join Date: Jul 2007 Location: Hamilton, Ohio Posts: 76	Cool, Thx Adam __________________ 90' Jeep XJ Buggy - 5.5 custom lift, 33" TSL's, locked 01' Softail 01' Dodge Ram Cummins 3500 4X4 71' Dodge Challenger Shane

03-06-2009, 05:18 PM	#13
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	the e2000 is the same one that truggy is talking about too, it is used on all small block ford trucks i believe. i had one mounted on my old jee as a backup to my factory pump, and have used them on lots of small block chevy swaps. never known one to go bad on teh trail, although i do keep my spare from the old jeep in my tool bag just in case someones does go bad. __________________ zuk buggy.....it'll be a jeep eventually.

03-07-2009, 10:20 PM	#14
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I gave Chris your pump today, and F.Y.I. it was putting 62.5 psi unregulated when i took it off just before halloween

03-08-2009, 12:57 PM	#15
xj-up Jeep XJ Join Date: Jul 2007 Location: Hamilton, Ohio Posts: 76	Cool, Thx. Adam I have a Holley fuel regulator that should work. Later, __________________ 90' Jeep XJ Buggy - 5.5 custom lift, 33" TSL's, locked 01' Softail 01' Dodge Ram Cummins 3500 4X4 71' Dodge Challenger Shane

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode