04-26-2010, 09:25 PM | #1 |
Join Date: Sep 2008
Posts: 433
|
not starting
I need your help guys. Went out to start my samurai today and she aint starting! Battery tested good. I dont know what else to do?? Any ideas! PLEASE HELP!!My truck broke today to! I'm in school and work.:confused: :confused:
|
04-26-2010, 09:39 PM | #2 |
Danny Beach
|
is it turning over trying to start ? did you check for spark at the plugs? it it getting fuel? More Info?
__________________
86 Ford Bronco |
04-26-2010, 09:47 PM | #3 |
Join Date: Sep 2008
Posts: 433
|
its not doing anything at all.no clicking or anything lights dont come on
|
04-26-2010, 09:51 PM | #4 |
Danny Beach
|
did you check fuse's under the hood?
I had a car do that it was a fuse dose the radio or anything inside the car work? thats what hapend to me wouldn't even try to start no lights but the radio and door locks worked
__________________
86 Ford Bronco |
04-26-2010, 09:52 PM | #5 |
Join Date: Sep 2008
Posts: 433
|
hmm.did not look but.i will tomorow
|
04-26-2010, 09:54 PM | #6 |
Danny Beach
|
good luck
__________________
86 Ford Bronco |
04-26-2010, 09:59 PM | #7 |
Join Date: Sep 2008
Posts: 433
|
haha.thanks this is a great start to the week.
|
04-26-2010, 10:03 PM | #8 |
still could be any number of things. Ignition switch. Starter relay. Seized starter selenoid. Loose contacts or shorted/broken wire. Do you have a good repair manual for it?
Are you getting 12 volts at the selenoid? If not the problem is before it. Bypass everything and run a power wire straight from the battery + to the 12V + on the starter selenoid. Just give it a slight touch to a good clean contact. If it cranks it's something between the key and the selenoid. If nothing still try tapping on the selenoid and repeat step 1. If it cranks you'll need a new starter soon.Start there first. |
|
04-26-2010, 10:17 PM | #9 |
Join Date: Sep 2008
Posts: 433
|
haha.ok.sorry this is just amuzing because i just with through this sh!t with my truck tonight.its haveing the same problems.i will tommorow thanks
|
04-26-2010, 10:30 PM | #10 |
Join Date: Sep 2008
Posts: 433
|
do you have any pictures of where the fuseable link is?
|
04-27-2010, 07:15 AM | #11 |
Danny Beach
|
it wasn't a fusable link on mine it was a regular fuse do you have a fuse box up under the hood?
I'll try and get a pic of one one one of my cars if I get the time today but like stickman said it could be anything
__________________
86 Ford Bronco |
04-27-2010, 09:00 AM | #12 |
Terrain Stomper
Join Date: Feb 2007
Location: Crittenden, KY
Posts: 633
|
so, not turning over at all? Does the radio at least come on when you turn the key to start like usual?
sounds like the starter is bad, try hitting it with a hammer while trying to start it. that may get you home or to somewhere better to work on it. |
04-27-2010, 09:17 AM | #13 |
Gearhead
Join Date: Mar 2008
Location: Anderson
Posts: 95
|
Not enough info to help you. (Of course, if you swap enough parts, you'll get to it eventually.) Like others have suggested, use a test light and/or a multimeter to see whether you're getting power/ground to the switch, relay, starter, etc. Let us know whether the radio, horn, interior lights work etc.
Good luck. |
04-27-2010, 09:29 AM | #14 |
Join Date: Sep 2008
Posts: 433
|
haha.no radio.horn doesnt work even when i bought it.but the lights dont come on or anything.
|
04-27-2010, 10:06 AM | #15 |
anywhere but there
Join Date: Jan 2007
Location: Blanchester, Oh
Posts: 174
|
make sure all your cables are good and tight from your battery. if the battery is good and a cable has become disconnected then all thein things you are describing could and would happen
__________________
|
04-27-2010, 10:29 AM | #16 |
- CORE Member -
|
I've had the same type of issue just because a battery cable was slightly loose and then corroded. Had to pull the cables off, clean everything, and put it back together. When I say loose, it's not like you could easily wiggle the cables on the battery but rather you could just barely rotate the clamp.
|
04-27-2010, 10:31 AM | #17 |
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
there is a single wire conection next to the positive cable on the positive terminal at the battery (white plastic housing) that is your fusible link for the whole vehicle. if posibly a jumper box or anything got hooked up incorrectly it could blow that. it can be bypassed for test purposes.
__________________
One of these days Zuk 2.0 |
04-27-2010, 12:21 PM | #18 |
It is possible if you have a bad or corroded connection some where the rainy days and moisture can make it worse also... I would check the chassis grounds for corosion too...
good luck
__________________
chris hodges
96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired |
|
04-27-2010, 02:08 PM | #19 |
Join Date: Sep 2008
Posts: 433
|
got it it was the fusible link corroded and broke stripped the wire back and connected it back to the terminal and fired right up.
|
04-27-2010, 02:09 PM | #20 |
Join Date: Sep 2008
Posts: 433
|
scott, did you ever figure out how much you want for them shifter seats?
|
04-27-2010, 03:28 PM | #21 |
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
i see i still know a few things about the trouble spots.;)
shifter sheets $12ea brass $10ea poly $6ea poly used if that works let me know thanks scott
__________________
One of these days Zuk 2.0 |
04-27-2010, 07:35 PM | #22 |
Danny Beach
|
well I wasn't too far off fuse/fusible link haha
__________________
86 Ford Bronco |
04-28-2010, 07:50 PM | #23 |
Join Date: Sep 2008
Posts: 433
|
ok.scott.i will have to figure something out as i am away at school.
|
Thread Tools | |
Display Modes | |
|
|