Carwash

Hybrid · 09-19-2007, 10:19 PM

I hear that you can get custom shock mounting tabs, is this true? If so do you have any that would work for an inverted shock system? Thanks! :)

carwash · 09-19-2007, 11:18 PM

looking for something like this?

http://www.complete4x4.com/catalog/p...roducts_id=141

Hybrid · 09-19-2007, 11:29 PM

I'am looking to do a set up like this. Do you have any mounts that would work?

http://home.4x4wire.com/adamf/88/ima...shockmount.jpg

fabricator · 09-19-2007, 11:29 PM

website is lookin good

carwash · 09-19-2007, 11:33 PM

thanks fabricator!!! i'm trying.

Hybrid... so yer looking for lower mounts to do that setup? any shots of the mounts?

scarface · 09-19-2007, 11:46 PM

I'm thinking a 1/2" bolt attached to a mount is the way to go for that

carwash · 09-19-2007, 11:52 PM

nah, the bolt thing is a bad idea, it's only single shear,and will break fairly easy... here is what you need.

the pic isnt the best, but you get the idea... it makes the shock eye sit opposed to the axle tube...

http://www.complete4x4.com/catalog/p...roducts_id=144

Hybrid · 09-19-2007, 11:57 PM

Those look great! That should work. Now do you have anything like that top bracket in the pic?

If i wanted to purchase those should I do it through your website?

scarface · 09-19-2007, 11:58 PM

This is what I am talking about, but the mount that Mike just posted would work also

Hybrid · 09-19-2007, 11:59 PM

Thats not a bad set up either

carwash · 09-20-2007, 12:17 AM

Quote:

Originally Posted by Hybrid

Those look great! That should work. Now do you have anything like that top bracket in the pic?

If i wanted to purchase those should I do it through your website?

I have nothing like the top mount... shouldn't be too hard to make custom tho.

If you want those, hit me with a pm... i can have them for you in a few days. Don't have them on the shelf.

4RunnerAdam · 09-20-2007, 05:57 AM

Mine is set up just like Scarface's. Hasnt broke yet, but I like the last mount Carwashed linked to. Would be a little stronger just for safety's sake.

Heck...I may even cut mine off and weld those on there since one of my bolts is stripped out, and I welded a nut to the bolt

carwash · 09-20-2007, 09:11 AM

double sheer is the way to go, let me know if you want a set as well.

jfiscus · 09-20-2007, 09:59 AM

In order to get this thread properly off-topic I would like to enquire about some d-ring/shackle mounts for bumper construction. Not just weld on the face of the bumper, but the kind that goes all the way thru the bumper & welds at least on the front/back. Make sense?

carwash · 09-20-2007, 10:25 AM

makes sense... you mean like this?

http://www.complete4x4.com/catalog/p...products_id=69

4RunnerAdam · 09-20-2007, 04:56 PM

hmm...I need those for my front bumper too! (someday)

jfiscus · 09-20-2007, 05:28 PM

Quote:

Originally Posted by carwash

makes sense... you mean like this?

http://www.complete4x4.com/catalog/p...products_id=69

YES!

Ok, I added them to my cart & made an account, now I can't "checkout" to get the shipping charge...

I'm on this page:
http://www.complete4x4.com/catalog/c...t_shipping.php
And I click the "Continue" link towards the bottom and it takes me back to this page:
http://www.complete4x4.com/catalog/shopping_cart.php
???
I'm on MAC 10.4.10 using Safari 2.0.4.

Do you deliver to CORE meetings instead of shipping?

- jason

carwash · 09-20-2007, 06:12 PM

yeah, site is not set up yet to take orders online and calculate shipping, etc...

I can possibly deliver to the meeting, or you can come by the shop sometime when im there.

Anything else you need? Hit me up on the PM side to finish this up.

At this point, the only way i can take a credit card is thru paypal, our merchant accounts wont be set up for about a month or so.

jfiscus · 09-21-2007, 09:05 AM

Quote:

Originally Posted by carwash

yeah, site is not set up yet to take orders online and calculate shipping, etc...

I can possibly deliver to the meeting, or you can come by the shop sometime when im there.

Anything else you need? Hit me up on the PM side to finish this up.

At this point, the only way i can take a credit card is thru paypal, our merchant accounts wont be set up for about a month or so.

Ok, it'd cost me more in gas for little stuff like this. But if you know you'll be at a meeting I could order some stuff like that I guess. There's really nowhere close to Middletown that stocks stuff like this.

carwash · 09-21-2007, 10:01 AM

If you put together some stuff, i can ship it to you, no big deal.

09-19-2007, 10:19 PM	#1
Hybrid Join Date: Mar 2007 Location: Fairfield, OH Posts: 134	Carwash I hear that you can get custom shock mounting tabs, is this true? If so do you have any that would work for an inverted shock system? Thanks! :) __________________ '84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage

09-19-2007, 11:18 PM	#2
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	looking for something like this? http://www.complete4x4.com/catalog/p...roducts_id=141 __________________

09-19-2007, 11:29 PM	#3
Hybrid Join Date: Mar 2007 Location: Fairfield, OH Posts: 134	I'am looking to do a set up like this. Do you have any mounts that would work? http://home.4x4wire.com/adamf/88/ima...shockmount.jpg __________________ '84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage

09-19-2007, 11:29 PM	#4
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	website is lookin good __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

09-19-2007, 11:33 PM	#5
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	thanks fabricator!!! i'm trying. Hybrid... so yer looking for lower mounts to do that setup? any shots of the mounts? __________________

09-19-2007, 11:46 PM	#6
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	I'm thinking a 1/2" bolt attached to a mount is the way to go for that __________________ I believe this will be our finest hour

09-19-2007, 11:52 PM	#7
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	nah, the bolt thing is a bad idea, it's only single shear,and will break fairly easy... here is what you need. the pic isnt the best, but you get the idea... it makes the shock eye sit opposed to the axle tube... http://www.complete4x4.com/catalog/p...roducts_id=144 __________________

09-19-2007, 11:57 PM	#8
Hybrid Join Date: Mar 2007 Location: Fairfield, OH Posts: 134	Those look great! That should work. Now do you have anything like that top bracket in the pic? If i wanted to purchase those should I do it through your website? __________________ '84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage

09-19-2007, 11:58 PM	#9
scarface I beat anorexia! Join Date: Feb 2007 Location: Fairfield Posts: 175	This is what I am talking about, but the mount that Mike just posted would work also Attached Images __________________ I believe this will be our finest hour Last edited by scarface; 09-20-2007 at 12:05 AM. Reason: Ninja edit

09-19-2007, 11:59 PM	#10
Hybrid Join Date: Mar 2007 Location: Fairfield, OH Posts: 134	Thats not a bad set up either __________________ '84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage Last edited by Hybrid; 09-20-2007 at 12:04 AM.

09-20-2007, 05:57 AM	#12
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	Mine is set up just like Scarface's. Hasnt broke yet, but I like the last mount Carwashed linked to. Would be a little stronger just for safety's sake. Heck...I may even cut mine off and weld those on there since one of my bolts is stripped out, and I welded a nut to the bolt

09-20-2007, 09:11 AM	#13
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	double sheer is the way to go, let me know if you want a set as well. __________________

09-20-2007, 09:59 AM	#14
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	In order to get this thread properly off-topic I would like to enquire about some d-ring/shackle mounts for bumper construction. Not just weld on the face of the bumper, but the kind that goes all the way thru the bumper & welds at least on the front/back. Make sense?

09-20-2007, 10:25 AM	#15
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	makes sense... you mean like this? http://www.complete4x4.com/catalog/p...products_id=69 __________________

09-20-2007, 04:56 PM	#16
4RunnerAdam Join Date: Apr 2007 Location: near eastgate mall Posts: 171	hmm...I need those for my front bumper too! (someday)

09-20-2007, 06:12 PM	#18
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	yeah, site is not set up yet to take orders online and calculate shipping, etc... I can possibly deliver to the meeting, or you can come by the shop sometime when im there. Anything else you need? Hit me up on the PM side to finish this up. At this point, the only way i can take a credit card is thru paypal, our merchant accounts wont be set up for about a month or so. __________________

09-21-2007, 10:01 AM	#20
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	If you put together some stuff, i can ship it to you, no big deal. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode