04-10-2013, 12:38 AM
|
#1 |
Join Date: Oct 2011
Posts: 116
|
Moving sale
I've got some stuff you know you need:
Dana 30 Aussie locker used SOLD Dana 30 chromoly shafts SOLD Np231 4cyl w/newer chain$75 More super sweet items and pics to be posted soon located in bainbridge oh Last edited by u&k metal works; 05-13-2013 at 09:20 PM. |
|
|
|
04-10-2013, 12:46 AM
|
#2 |
|
Join Date: Oct 2011
Posts: 116
|
More stuff:
4.88 gears dana30 rev and dana35 used $75 Gm 400auto 2wd approximate 80000 miles $175 Last edited by u&k metal works; 05-05-2013 at 07:07 PM. |
|
|
|
|
04-15-2013, 08:03 PM
|
#3 |
|
Join Date: Oct 2011
Posts: 116
|
|
|
|
|
|
04-17-2013, 09:04 AM
|
#4 |
|
Join Date: Oct 2011
Posts: 116
|
New addition
Last edited by u&k metal works; 05-05-2013 at 07:07 PM. |
|
|
|
|
04-17-2013, 10:43 AM
|
#5 |
|
Cleaning off the rust...
Join Date: Jan 2007
Location: Cincinnati, OH
Posts: 1,009
|
can I assume the 203 has a 27spl input?
__________________
brad  5.0L | 435 | 203 | 300 | 4.10 | 39.5 Buildup BACK underway... 
|
|
|
|
|
04-22-2013, 01:18 PM
|
#6 |
|
Join Date: Oct 2011
Posts: 116
|
Yes sir the 203 is 27 spline it would look sexy in your shop
|
|
|
|
|
05-01-2013, 09:14 PM
|
#7 |
|
Join Date: Jan 2013
Posts: 4
|
Ttt
|
|
|
|
|
05-05-2013, 07:08 PM
|
#8 |
|
Join Date: Oct 2011
Posts: 116
|
New super low mothers day special prices
|
|
|
|
|
05-06-2013, 10:20 AM
|
#9 |
Join Date: Feb 2011
Location: miamisburg
Posts: 191
|
What is the input shaft length on the 231? I bought one with a sye on it but don't know if it will match my grand.
Sent from my DROID BIONIC using Tapatalk 2 |
|
|
|
|
05-06-2013, 01:15 PM
|
#10 |
|
Join Date: Oct 2011
Posts: 116
|
231 has a 21 spline input it's out of a 4cyl tj
|
|
|
|
|
05-06-2013, 01:25 PM
|
#11 |
|
Join Date: Oct 2011
Posts: 116
|
I'll measure the length but your grand is prob a 23 spline
|
|
|
|
|
05-07-2013, 11:55 PM
|
#12 |
|
Join Date: Mar 2011
Posts: 11
|
still have the aussie?
|
|
|
|
|
05-08-2013, 08:43 AM
|
#13 | |
|
Join Date: Oct 2011
Posts: 116
|
Quote:
|
|
|
|
|
|
05-08-2013, 01:20 PM
|
#14 |
|
Join Date: May 2013
Posts: 2
|
dana 30 axle shafts & locker
I'm interested in your dana 30 chromoly axle shafts. I'm curious to know if the axle shaft splines are the same as stock. Any more info you could give me is appreciated. Thx
|
|
|
|
|
05-08-2013, 02:15 PM
|
#15 | |
|
Join Date: Oct 2011
Posts: 116
|
Quote:
|
|
|
|
|
|
05-14-2013, 03:07 PM
|
#16 |
|
Join Date: Oct 2011
Posts: 116
|
Updated. New addition Dana 30 stock shafts I have 1 set left $50 a set
Last edited by u&k metal works; 05-15-2013 at 08:10 PM. |
|
|
|
|
05-15-2013, 02:55 PM
|
#17 |
|
Join Date: Oct 2011
Posts: 116
|
More stuff: Dana 30 carrier 3.90 and num. higher I have 2 $20 each
|
|
|
|
|
05-31-2013, 07:50 PM
|
#18 |
|
Join Date: Oct 2011
Posts: 116
|
More stuff 4 36x12.50x15 super swamper tsl these would make good spares they have very little tread I have grooved one to show potential how's $20 a tire if you take them all
Also a set of 6lug 15x8 steel wheels need cleaned up but not terrible $75 takes them |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
