steering

cincychris · 01-08-2008, 06:56 PM

I have a 91 xj, That i put a ford d44 up front with radius arms and a 6.5" lift. I was just wonering what you guys would do for steering on it. Upgrade the steering box to a bigger one and link it with 1.5" dom with heims? It is not high steer. Just looking for options or any suggestions. The heep is only a woods beater. Thanks.

jeepmanjeff · 01-08-2008, 10:32 PM

What size tires will you be running?

Did you change the caster of the axle?

MrShoeBoy · 01-09-2008, 12:37 AM

Try and at the very least do hi steer on the passenger knuckle so the angle on the drag link isnt so bad. With a steep trackbar/drag link it will handle like crap and will put excessive wear on the steering joints. I had TREs and around 5.5" of lift on my XJ with the tie rod over the knuckle in the factory position and I would wear out the TREs in about 8 months of DD and wheeling once every 3 weeks. If at all possible, spend the cash now and do it right cause it will cost you in the long run. Ask me how I know ;)

AARON

JET455 · 01-09-2008, 12:59 AM

Definitely go with a highsteer set up it will make a big differnce. The XJ steering box should work just fine and can be tapped for hydro assist in the future.

Contact Gunrunner here on the board he can take care of you on knuckles and high steer arms.

cincychris · 01-09-2008, 07:53 PM

Thanks everybody for the info and jeepmanjeff im running 39.5 cut boggers.

01-08-2008, 06:56 PM	#1
cincychris Join Date: Apr 2007 Location: anderson,ohio Posts: 22	steering I have a 91 xj, That i put a ford d44 up front with radius arms and a 6.5" lift. I was just wonering what you guys would do for steering on it. Upgrade the steering box to a bigger one and link it with 1.5" dom with heims? It is not high steer. Just looking for options or any suggestions. The heep is only a woods beater. Thanks.

01-08-2008, 10:32 PM	#2
jeepmanjeff Ah Unz ze President! - CORE Member - - Moderator - Join Date: Jan 2007 Location: Fairfield Ohio Posts: 588 Images: 343	Questions What size tires will you be running? Did you change the caster of the axle? __________________ Keep them on all 4's

01-09-2008, 12:37 AM	#3
MrShoeBoy Join Date: Dec 2007 Location: Cincinnati Posts: 120	Try and at the very least do hi steer on the passenger knuckle so the angle on the drag link isnt so bad. With a steep trackbar/drag link it will handle like crap and will put excessive wear on the steering joints. I had TREs and around 5.5" of lift on my XJ with the tie rod over the knuckle in the factory position and I would wear out the TREs in about 8 months of DD and wheeling once every 3 weeks. If at all possible, spend the cash now and do it right cause it will cost you in the long run. Ask me how I know ;) AARON __________________ 91 MJ Under construction

01-09-2008, 12:59 AM	#4
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	Definitely go with a highsteer set up it will make a big differnce. The XJ steering box should work just fine and can be tapped for hydro assist in the future. Contact Gunrunner here on the board he can take care of you on knuckles and high steer arms. __________________ if i am not currently offending you, i will be shortly.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2008, 07:53 PM	#5
cincychris Join Date: Apr 2007 Location: anderson,ohio Posts: 22	Thanks everybody for the info and jeepmanjeff im running 39.5 cut boggers.