11-09-2009, 09:18 PM
|
#1 |
|
Really???
Join Date: Sep 2009
Location: Cincy
Posts: 678
|
Samurai Alternator Options?
What alternator are you Sammy guys running? I have a 1.6 8v and have read on other forums that the GM upgrade is not so good as they are not made to turn more that 3000 rpm. ??? Just trying to see what is out there. Thanks!
|
|
|
|
11-10-2009, 12:11 AM
|
#2 | |
Join Date: Feb 2007
Location: New Richmond Ohio
Posts: 266
|
Quote:
I very much disagree. I run a 94 amp gm. 1 wire on my 1.6 8v. with zero problems. |
|
|
|
|
|
11-10-2009, 12:19 PM
|
#3 | |
|
Retired
Join Date: May 2008
Location: Hamilton/Ross
Posts: 645
|
Quote:
never heard the 3000 rpm
__________________
One of these days Zuk 2.0 |
|
|
|
|
|
11-10-2009, 04:43 PM
|
#4 |
|
Really???
Join Date: Sep 2009
Location: Cincy
Posts: 678
|
Alright, so what do i need to do the conversion?
|
|
|
|
|
11-10-2009, 06:19 PM
|
#5 |
|
Join Date: Oct 2008
Location: 1
Posts: 92
|
Go with a GM alt., they're cheap and easy to find.The one wire set up is not preferred for our use due to the fact that it doesn't fully energize until about 1800-2200 RPM depending on who you talk to. It's easy to do the three wire system, there are tons of sites on the net that will walk you through it.
|
|
|
|
|
11-10-2009, 06:43 PM
|
#6 |
Join Date: Feb 2008
Location: middletown,oh
Posts: 508
|
http://www.zukikrawlers.com/showthre...hlight=GM+wire
Its easy as pie, but spend the money and buy the alt somewhere beside Autozone. My last 2 from there lasted 1 trip, and 3 trips. They had lifetime warrentys but it sucks changing them all the time. Adam |
|
|
|
|
11-10-2009, 09:24 PM
|
#7 |
|
Diesel guy
Join Date: Jul 2009
Location: Bridgetown
Posts: 241
|
ive been looking into doing the gm upgrade too, hmm i just might do it now that i have some good info
__________________
2013 RZR S |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
