12-27-2009, 04:16 PM | #1 |
Join Date: Sep 2008
Posts: 433
|
sammi wiper motor.
Hey guys, i have an 88' sammi and the wipers arent working i replaced the wiper motor with a reman. one, didnt work. i need some ideas why this aint working?
thanks, adam |
12-27-2009, 05:17 PM | #2 |
Diesel guy
Join Date: Jul 2009
Location: Bridgetown
Posts: 241
|
Are you getting power to the motor? blown fuse maybe? bad switch?
__________________
2013 RZR S |
12-27-2009, 06:58 PM | #3 |
Join Date: Sep 2008
Posts: 433
|
im getting powers to the motor.and good fuses. i dont know how to check the switch though.
|
12-28-2009, 12:01 AM | #4 |
EX-Vice President
|
smack it with a hammer while turning it off and on.
__________________
|
12-28-2009, 02:43 AM | #5 |
Diesel guy
Join Date: Jul 2009
Location: Bridgetown
Posts: 241
|
and if that doesnt work, get a bigger hammer
__________________
2013 RZR S |
12-28-2009, 04:15 PM | #6 |
Join Date: Sep 2008
Posts: 433
|
lol.ok.it should work though its a remanufactured one rfrom oreily.
|
12-28-2009, 05:12 PM | #7 | |
Diesel guy
Join Date: Jul 2009
Location: Bridgetown
Posts: 241
|
Quote:
check it with a DVOM. each time you turn the switch up there should be less resistance than the position before. maybe your getting power enough to light a test light but not enough to run the motor.
__________________
2013 RZR S |
|
12-28-2009, 05:25 PM | #8 |
Join Date: Jan 2007
Location: Cincy, Oh
Posts: 947
|
just hook to motor up to the battery and see if it comes on or not
__________________
For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it.... |
12-28-2009, 06:20 PM | #9 |
Join Date: Sep 2008
Posts: 433
|
what do i use to hook the motor up to the battery?
|
12-28-2009, 08:07 PM | #10 |
Diesel guy
Join Date: Jul 2009
Location: Bridgetown
Posts: 241
|
just use extra wire you might have laying around run one to a positive and one to the negative
__________________
2013 RZR S |
12-28-2009, 09:24 PM | #11 |
Join Date: Sep 2008
Posts: 433
|
ok.ill try that tommorow.i tested to make sure i was getting power to the motor again today and i was so i already called oreily and there getting a new motor wednesday.so ill try that and go from there.thanks for all your help i ll keep you posted.
|
12-29-2009, 12:34 AM | #12 |
Join Date: Feb 2007
Location: New Richmond Ohio
Posts: 266
|
Make sure its mounted with a good ground from the windshield frame to the body, if not it aint goin work.
|
Thread Tools | |
Display Modes | |
|
|