Distributor install

itbrokeagain · 11-09-2010, 06:10 PM

I have installed distributors before and never had an issue. Had to pull the distributor in my Yj to replace the ignition module. Now I can not get it to drop back down. I have tried everything I can think of and no luck. I there a trick to a 5.0 distributor.

Flxratd · 11-09-2010, 06:18 PM

sounds like it might not be slipping over the oil pump rod. you can take a 1/4 drive i think 5/16 six point socket and an extention and turn the oil pump slightly and then try again. may take a couple times.

11-09-2010, 06:10 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Distributor install I have installed distributors before and never had an issue. Had to pull the distributor in my Yj to replace the ignition module. Now I can not get it to drop back down. I have tried everything I can think of and no luck. I there a trick to a 5.0 distributor. __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

11-09-2010, 06:18 PM	#2
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	sounds like it might not be slipping over the oil pump rod. you can take a 1/4 drive i think 5/16 six point socket and an extention and turn the oil pump slightly and then try again. may take a couple times. __________________ One of these days Zuk 2.0

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode