3500 RPM, falls on its face

hotrod · 11-09-2010, 07:42 PM

:mad: nissan pickup with the 2.4 4cyl when driving it once it gets to 3500 rpm it completly falls on its face and wont pick up untill about 2700 rpm, wht gives? somebody chime in :confused:

Hope Springs Hauler · 11-09-2010, 08:41 PM

plugged fuel filter?

hotrod · 11-09-2010, 10:09 PM

i guess that a possability, never really thought of that to be honest, i was assuming spark. it has a check engine light on but its OBD1 and i dont have a scanner that will do one i have an OBD2 scanner.:(

gothodgie · 11-09-2010, 11:50 PM

i had a 88 mazda p/u that did the same thing... Took me forever to figure it out... The filter was almost on top of the tank... Fuel filter fixed it...

good luck
Chris

hotrod · 11-10-2010, 01:14 AM

awesome thanks chris i looked online and i guess the filter is on the right side on the fire wall and its only 13 bucks im gettin a filter as soon as i get off work here

hotrod · 11-10-2010, 10:04 AM

negative on the fuel filter :mad:

bgwyllys61 · 11-10-2010, 01:17 PM

cat, converter? had a ford truck do this same thing, ran great except for a certain rpm, it wouldnt do anything, but if you got past it, or before the rpms it ran fine

humpy · 11-10-2010, 01:20 PM

sometimes with obdI you can get in your book and there will be 2 pins you can cross on the plug with a paper clip or jumper wire and it will make your service light flash a certain pattern when you turn they key on and that pattern will be in defined in your book (haynes)...hope this helps..

gothodgie · 11-10-2010, 03:44 PM

Quote:

Originally Posted by hotrod

negative on the fuel filter :mad:

damn.... good luck...

hotrod · 11-10-2010, 05:34 PM

Quote:

Originally Posted by bgwyllys61

cat, converter? had a ford truck do this same thing, ran great except for a certain rpm, it wouldnt do anything, but if you got past it, or before the rpms it ran fine

really? hmm ill look into that

thanks

Quote:

Originally Posted by humpy

sometimes with obdI you can get in your book and there will be 2 pins you can cross on the plug with a paper clip or jumper wire and it will make your service light flash a certain pattern when you turn they key on and that pattern will be in defined in your book (haynes)...hope this helps..

ahh flash codes

thanks

Quote:

Originally Posted by gothodgie

damn.... good luck...

ya, thanks anyway tho!!

KargoMaster · 11-10-2010, 08:01 PM

Quote:

Originally Posted by bgwyllys61

cat, converter? had a ford truck do this same thing, ran great except for a certain rpm, it wouldnt do anything, but if you got past it, or before the rpms it ran fine

I was also thinking cat. converter after the fuel filter struck out... I believe that we had to drill holes into one on an historic road-trip down to the Gorge.... was a Ranger towing a Zuk.

hotrod · 11-10-2010, 08:03 PM

unbolted exhaust before cat... and.... still same thing. :(
also bought a new dist. cap and rotor button and that didnt help either.
noticed that the dist. looked retarded.. ;) so took it loose and forked around with it a bit. got a little better but went up to about 4100 rpm b4 it starts its s41t

**Also, if you mash the skinny pedal from idle it stumbles over itself, clears up about 1300 then starts to its normal bull-snot at 3800 :mad:

im going to buy a chiltons i guess, insted of throwing parts at it

KargoMaster · 11-10-2010, 08:15 PM

poop.

gothodgie · 11-10-2010, 09:09 PM

Quote:

Originally Posted by KargoMaster

poop.

x2

Hope Springs Hauler · 11-10-2010, 11:02 PM

Does it happen anytime, or only when warmed up? Wondering about the o2 sensor.

hotrod · 11-10-2010, 11:36 PM

Quote:

Originally Posted by Hope Springs Hauler

Does it happen anytime, or only when warmed up? Wondering about the o2 sensor.

Happens anytime warm or cold was wonderin injector? Like i couldnt keep up with the demand

way2fast4u · 11-11-2010, 12:48 AM

i had a 89 nissian hardbody 2.4 or z24 something like that i had the same problem ended up being the computer had dust all on the inside of it. it was like a rev limiter at 3700.it was the computer under the seat was number 23 on mine if u try it get the exact same number computer. hope this helps good luck ;)

hotrod · 11-11-2010, 02:12 AM

Quote:

Originally Posted by way2fast4u

i had a 89 nissian hardbody 2.4 or z24 something like that i had the same problem ended up being the computer had dust all on the inside of it. it was like a rev limiter at 3700.it was the computer under the seat was number 23 on mine if u try it get the exact same number computer. hope this helps good luck ;)

How much was the computer you got? Wonder if i could go to you pull and pay and swipe one out of a car

way2fast4u · 11-11-2010, 09:39 AM

i went to besslers and bought 3 didn fix it went to advance auto payed 200 for one and drove it till i sold it if u find one with the same computer number i think you would be ok but i couldnt find a 4x4 nissian at the scrapyards with a 2.4 in it so i tryed a bunch of 2wd doesnt work

hope this helps steven

hotrod · 11-11-2010, 06:52 PM

ok cool thanks also found online it might be a maf sensor :confused:

flatlander757 · 11-12-2010, 07:57 PM

Have you replaced the crankshaft sensor? Or inspected the flywheel/trigger wheel/whatever it reads off of? If there is a chipped tooth or something that could screw it all up. If it's a cheap part, may be worth getting just to eliminate another "possibility"

hotrod · 11-13-2010, 12:24 AM

figured it out! Dirty maf sensor took it off strayed some cleaner on it and it runs amazing pulls thru all the gears like it should now i can start playin with it i think i need some 31s :-) haha

itbrokeagain · 11-13-2010, 04:27 PM

I had an 86 hardbody that was a piece of crap. I wish I had never gotten rid of that truck. Had 35s with no lift. Lots and lots and lots of trimming

hotrod · 11-13-2010, 04:29 PM

Quote:

Originally Posted by itbrokeagain

I had an 86 hardbody that was a piece of crap. I wish I had never gotten rid of that truck. Had 35s with no lift. Lots and lots and lots of trimming

35s and no lift?!?! haha thats crazy your right, lots and lots of trimming haha

11-09-2010, 07:42 PM	#1
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	3500 RPM, falls on its face :mad: nissan pickup with the 2.4 4cyl when driving it once it gets to 3500 rpm it completly falls on its face and wont pick up untill about 2700 rpm, wht gives? somebody chime in :confused: __________________ 2013 RZR S

11-09-2010, 08:41 PM	#2
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	plugged fuel filter? __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

11-09-2010, 10:09 PM	#3
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	i guess that a possability, never really thought of that to be honest, i was assuming spark. it has a check engine light on but its OBD1 and i dont have a scanner that will do one i have an OBD2 scanner.:( __________________ 2013 RZR S

11-09-2010, 11:50 PM	#4
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	i had a 88 mazda p/u that did the same thing... Took me forever to figure it out... The filter was almost on top of the tank... Fuel filter fixed it... good luck Chris __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

11-10-2010, 01:14 AM	#5
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	awesome thanks chris i looked online and i guess the filter is on the right side on the fire wall and its only 13 bucks im gettin a filter as soon as i get off work here __________________ 2013 RZR S

11-10-2010, 10:04 AM	#6
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	negative on the fuel filter :mad: __________________ 2013 RZR S

11-10-2010, 01:17 PM	#7
bgwyllys61 fullwidthxj Join Date: Feb 2008 Location: lex Posts: 15	cat, converter? had a ford truck do this same thing, ran great except for a certain rpm, it wouldnt do anything, but if you got past it, or before the rpms it ran fine

11-10-2010, 01:20 PM	#8
humpy Join Date: Sep 2008 Posts: 573	sometimes with obdI you can get in your book and there will be 2 pins you can cross on the plug with a paper clip or jumper wire and it will make your service light flash a certain pattern when you turn they key on and that pattern will be in defined in your book (haynes)...hope this helps..

11-10-2010, 08:03 PM	#12
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	unbolted exhaust before cat... and.... still same thing. :( also bought a new dist. cap and rotor button and that didnt help either. noticed that the dist. looked retarded.. ;) so took it loose and forked around with it a bit. got a little better but went up to about 4100 rpm b4 it starts its s41t **Also, if you mash the skinny pedal from idle it stumbles over itself, clears up about 1300 then starts to its normal bull-snot at 3800 :mad: im going to buy a chiltons i guess, insted of throwing parts at it __________________ 2013 RZR S

11-10-2010, 08:15 PM	#13
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	poop. __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

11-10-2010, 11:02 PM	#15
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Does it happen anytime, or only when warmed up? Wondering about the o2 sensor. __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

11-11-2010, 12:48 AM	#17
way2fast4u Join Date: Jun 2010 Posts: 8	i had a 89 nissian hardbody 2.4 or z24 something like that i had the same problem ended up being the computer had dust all on the inside of it. it was like a rev limiter at 3700.it was the computer under the seat was number 23 on mine if u try it get the exact same number computer. hope this helps good luck ;)

11-11-2010, 09:39 AM	#19
way2fast4u Join Date: Jun 2010 Posts: 8	i went to besslers and bought 3 didn fix it went to advance auto payed 200 for one and drove it till i sold it if u find one with the same computer number i think you would be ok but i couldnt find a 4x4 nissian at the scrapyards with a 2.4 in it so i tryed a bunch of 2wd doesnt work hope this helps steven

11-11-2010, 06:52 PM	#20
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	ok cool thanks also found online it might be a maf sensor :confused: __________________ 2013 RZR S

11-12-2010, 07:57 PM	#21
flatlander757 Fartface extrordinair Join Date: Aug 2010 Location: West Carrollton Posts: 127	Have you replaced the crankshaft sensor? Or inspected the flywheel/trigger wheel/whatever it reads off of? If there is a chipped tooth or something that could screw it all up. If it's a cheap part, may be worth getting just to eliminate another "possibility"

11-13-2010, 12:24 AM	#22
hotrod Diesel guy Join Date: Jul 2009 Location: Bridgetown Posts: 241	figured it out! Dirty maf sensor took it off strayed some cleaner on it and it runs amazing pulls thru all the gears like it should now i can start playin with it i think i need some 31s :-) haha __________________ 2013 RZR S

11-13-2010, 04:27 PM	#23
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	I had an 86 hardbody that was a piece of crap. I wish I had never gotten rid of that truck. Had 35s with no lift. Lots and lots and lots of trimming __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode