Carwash Crawler - Build Thread... again.

carwash · 02-06-2008, 10:08 AM

I've been a busy bee this weekend, damn near have the chassis done minus the belly. Did a little redesign on the front a-pillar connector... When you are on a strict deadline, redesigning things is a definite step backwards, but i think it was worth it, as the windshield area looks much better (meaner) than before.

Also did a bunch of work to the cowl, well Brad (KargoMaster on here) did a bunch of work to the cowl. He was nice enough to spend the whole day working with me. Again proving that things go way more than twice as fast with two people. Had to cut the stock windshield area off of it. Then had to notch out the cowl where two of the front end supports go from the front end to the upper dash bar. Had to cut completely through it so i will cover those holes with some nothced tubing. I'm also going to have another buddy TIG the whole seem from the upright to the curved area, after i get rid of all the assembly putty in there. It will look alot better and be much stronger.

02-06-2008, 10:08 AM	#15
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	I've been a busy bee this weekend, damn near have the chassis done minus the belly. Did a little redesign on the front a-pillar connector... When you are on a strict deadline, redesigning things is a definite step backwards, but i think it was worth it, as the windshield area looks much better (meaner) than before. Also did a bunch of work to the cowl, well Brad (KargoMaster on here) did a bunch of work to the cowl. He was nice enough to spend the whole day working with me. Again proving that things go way more than twice as fast with two people. Had to cut the stock windshield area off of it. Then had to notch out the cowl where two of the front end supports go from the front end to the upper dash bar. Had to cut completely through it so i will cover those holes with some nothced tubing. I'm also going to have another buddy TIG the whole seem from the upright to the curved area, after i get rid of all the assembly putty in there. It will look alot better and be much stronger. __________________