Go Back   C.O.R.E. FORUM > Campfire > Tech and How-To
Gallery FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
Old 06-12-2008, 09:53 PM   #1
Hybrid
 
Hybrid's Avatar
 
Join Date: Mar 2007
Location: Fairfield, OH
Posts: 134
700R4 acting up!

I took the jeep out for a spin today and the tranny was shifting really hard from 1st to 2nd out of nowhere. It didn't do this a week or two ago the last time I took it out. I put a brand new Kickdown cable on it about 6 months ago, could this be the issue? Possible needs adjustment after strecthing or could it be just low fluid? I checked the tranny fluid while running in idle but it was nearly impossible to tell if it was at level or not. I could see fluid on the stick but a distinct line was not visible. Any suggestions would be much appreciated!!
__________________
'84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage
Hybrid is offline   Reply With Quote
Old 06-13-2008, 12:18 PM   #2
sarge
Pure Bacon
 
sarge's Avatar
 
Join Date: Jan 2007
Location: Trenton, Oh
Posts: 1,098
Sounds like the Gov. is sticking . I would try to put a bottle of Lucas in it and drive it around a little. the trans fluid should be approx. an inch or so up on the dip stick . I have had great luck with the Lucas oil products .
sarge is offline   Reply With Quote
Old 06-13-2008, 05:49 PM   #3
Hybrid
 
Hybrid's Avatar
 
Join Date: Mar 2007
Location: Fairfield, OH
Posts: 134
Should I put the entire bottle in the tranny even if the fluid is at level? How big of a bottle should I use or does just come in one size?
__________________
'84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage
Hybrid is offline   Reply With Quote
Old 06-13-2008, 06:08 PM   #4
cheech
 
Join Date: May 2007
Location: cincinnati
Posts: 18
Make sure you have the cable adjusted properly, quick way to burn a 700 up.
It is not a kick down cable, it is called the throttle valve cable and controls line pressure and line rise. One link on adjusting numbers 4 and 5 i believe http://www.transmissioncenter.net/subject.htm

Last edited by cheech; 06-13-2008 at 06:18 PM. Reason: added link
cheech is offline   Reply With Quote
Old 06-16-2008, 02:49 PM   #5
Hybrid
 
Hybrid's Avatar
 
Join Date: Mar 2007
Location: Fairfield, OH
Posts: 134
Well I figured it out! The throttle valve cable just needed a little readjustment. Once I properly reset it the tranny shifted smoother than silk! Thanks for all the info and help!
__________________
'84 Cherokee body welded to an '86 Blazer frame , fuel injected 350, 700r4 trans, np208 t-case, 44 front and a welded 14 bolt in the rear on 35" boggers, radiator in the rear, and a full cage
Hybrid is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 2021, C.O.R.E. All rights reserved.