replacing leaf springs

cincygman · 11-16-2008, 10:39 PM

OK, anyone gotta good trick for getting the bolts out a leaf spring bushing with out a tourch or other impliment of destruction. The front bolt is turning but it is froze up in the bushing. I've burned them out before but I was hoping someone has come up with something better by now.:(

94Dodge Truggy · 11-17-2008, 08:09 AM

Large cutoff wheel or bi-metal torch sawzall blade maybe?

11-17-2008, 08:17 AM

Shop Press!

jfiscus · 11-17-2008, 09:39 AM

If you have an impact, keep at it & keep spraying it down with PB or something similar, you may get lucky with it coming loose, but probably not.

As long as that inside nut hasn't busted loose on you (THAT REALLY SUCKS) then get out the angle grinder and put a 4.5" or larger disk on it and cut that bolt off on both sides of the leaf. (this will be messy - wear gloves) Find a replacement bolt at tractor supply.

RD TRCTR · 11-17-2008, 08:40 PM

Are you taking springs out and replacing with another set?

If so, break down and use the hot wrench. If the bolt is rust-welded to the bushing sleeve it ain't coming out. And, besides, if that is the case, the bushing is fubarred anyways.

maddhatter · 11-17-2008, 10:16 PM

I don't even bother trying to get old spring bolts out any more. I just cut them.
If you need to get a old bushing out here's a trick I use. It's a pit arm puller.

cincygman · 11-18-2008, 08:04 AM

I already had the idea of cutting the bolt and using anew one. just wondering if some one had a new trick. I'vegot the pullers and impact and stuff. The inside nut did not brake loose, so I'm good there. Thanks guys:)

cincygman · 11-18-2008, 06:12 PM

Anyone know the size of the bolts?

cincygman · 11-21-2008, 08:03 AM

OK, swapped out the leafspring (Thanks Sarge for the leafspring) and saved the front bolt! some surgery with a 4 1/2" grinder. Was able to surgically (is that a word) remove the old bushing. Only took about 1 1/2 hour.

cincygman · 11-21-2008, 08:05 AM

Sorry, no pics, I left the house in a hurry and didn't bring the camera

11-16-2008, 10:39 PM	#1
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	replacing leaf springs OK, anyone gotta good trick for getting the bolts out a leaf spring bushing with out a tourch or other impliment of destruction. The front bolt is turning but it is froze up in the bushing. I've burned them out before but I was hoping someone has come up with something better by now.:( __________________ Romans 7-8

11-17-2008, 08:09 AM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Large cutoff wheel or bi-metal torch sawzall blade maybe? __________________

11-18-2008, 08:04 AM	#7
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	I already had the idea of cutting the bolt and using anew one. just wondering if some one had a new trick. I'vegot the pullers and impact and stuff. The inside nut did not brake loose, so I'm good there. Thanks guys:) __________________ Romans 7-8

11-18-2008, 06:12 PM	#8
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	Anyone know the size of the bolts? __________________ Romans 7-8

11-21-2008, 08:03 AM	#9
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	OK, swapped out the leafspring (Thanks Sarge for the leafspring) and saved the front bolt! some surgery with a 4 1/2" grinder. Was able to surgically (is that a word) remove the old bushing. Only took about 1 1/2 hour. __________________ Romans 7-8

11-17-2008, 09:39 AM	#4
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	If you have an impact, keep at it & keep spraying it down with PB or something similar, you may get lucky with it coming loose, but probably not. As long as that inside nut hasn't busted loose on you (THAT REALLY SUCKS) then get out the angle grinder and put a 4.5" or larger disk on it and cut that bolt off on both sides of the leaf. (this will be messy - wear gloves) Find a replacement bolt at tractor supply.

11-17-2008, 08:40 PM	#5
RD TRCTR Join Date: Nov 2007 Location: Troy, OH Posts: 94	Are you taking springs out and replacing with another set? If so, break down and use the hot wrench. If the bolt is rust-welded to the bushing sleeve it ain't coming out. And, besides, if that is the case, the bushing is fubarred anyways.

11-17-2008, 10:16 PM	#6
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	I don't even bother trying to get old spring bolts out any more. I just cut them. If you need to get a old bushing out here's a trick I use. It's a pit arm puller.

11-21-2008, 08:05 AM	#10
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	Sorry, no pics, I left the house in a hurry and didn't bring the camera __________________ Romans 7-8

11-17-2008, 08:17 AM	#3
BROWN Guest Posts: n/a	Shop Press!