my new ride

boomhauer · 08-24-2009, 05:32 PM

No, Sally just takes his rigs "swimming."

i remember swimming one year at windrock there brad. people who live in glass houses....

Flxratd · 08-24-2009, 07:10 PM

Quote:

Originally Posted by boomhauer

No, Sally just takes his rigs "swimming."

i remember swimming one year at windrock there brad. people who live in glass houses....

uh oh does brad have a story he would like to tell

bc35339 · 08-24-2009, 09:53 PM

2 days after pickup.
Pulled motor to replace throw out bearing and found out that the inputshaft had about a1 inch of front to back play and 1/2 inch up and down play so I replaced it with another w56 and I have a centerforce clutch and pressure plate for it.. For the oil leak the timing chain cover is cracked ( the bolt that goes through the valve cover was tightened to much and cracked the cover so Iam replacing that and puting a new head gasket on while its apart. Was going to put a cam in it but looks to have a new aftermarket cam in it of some kind.

mckeddie · 08-24-2009, 10:34 PM

good looking buggy, but damn, a 10 bolt and 42's? those axles have to already be living on borrowed times.

Nuts · 08-24-2009, 11:30 PM

I drug a trans and T-case to zooki melt because the previous owners buddy said this buggy needed them. But once I got there they told me he had bought a complete truck and didn't need mine anymore:mad: sounds like he needed them after all...

It is a nice rig though

bc35339 · 08-25-2009, 07:39 AM

He told me that it was just a throw out bearing making the noise.
O well ill have i lined out in a week or so
I plan on putting new skins on it to.Ill take some pics as I go and post them.
Question?
I bought this off ebay and asked seller about any knowed problems and he said nothing about the oil leak that leaks about that size of the bottom of a 5 gallon bucket in 2 min. of running.
What kind of feedback should I leave???
Ive been holding off on doing this not sure on to say anything about it?

94Dodge Truggy · 08-25-2009, 08:48 AM

Quote:

Originally Posted by bc35339

He told me that it was just a throw out bearing making the noise.
O well ill have i lined out in a week or so
I plan on putting new skins on it to.Ill take some pics as I go and post them.
Question?
I bought this off ebay and asked seller about any knowed problems and he said nothing about the oil leak that leaks about that size of the bottom of a 5 gallon bucket in 2 min. of running.
What kind of feedback should I leave???
Ive been holding off on doing this not sure on to say anything about it?

Ask him about the leak once more and see what he says. I would go negative it sounds like on the feedback unless he is willing to work something out. .02 cents worth right there!

08-24-2009, 05:32 PM	#1
boomhauer Join Date: Mar 2008 Posts: 188	No, Sally just takes his rigs "swimming." i remember swimming one year at windrock there brad. people who live in glass houses.... __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

08-24-2009, 09:53 PM	#3
bc35339 Join Date: Nov 2007 Location: Mount Washington KY Posts: 133	2 days after pickup. Pulled motor to replace throw out bearing and found out that the inputshaft had about a1 inch of front to back play and 1/2 inch up and down play so I replaced it with another w56 and I have a centerforce clutch and pressure plate for it.. For the oil leak the timing chain cover is cracked ( the bolt that goes through the valve cover was tightened to much and cracked the cover so Iam replacing that and puting a new head gasket on while its apart. Was going to put a cam in it but looks to have a new aftermarket cam in it of some kind. Last edited by bc35339; 08-24-2009 at 10:00 PM.

08-24-2009, 10:34 PM	#4
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	good looking buggy, but damn, a 10 bolt and 42's? those axles have to already be living on borrowed times. __________________ zuk buggy.....it'll be a jeep eventually.

08-24-2009, 11:30 PM	#5
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	I drug a trans and T-case to zooki melt because the previous owners buddy said this buggy needed them. But once I got there they told me he had bought a complete truck and didn't need mine anymore:mad: sounds like he needed them after all... It is a nice rig though

08-25-2009, 07:39 AM	#6
bc35339 Join Date: Nov 2007 Location: Mount Washington KY Posts: 133	He told me that it was just a throw out bearing making the noise. O well ill have i lined out in a week or so I plan on putting new skins on it to.Ill take some pics as I go and post them. Question? I bought this off ebay and asked seller about any knowed problems and he said nothing about the oil leak that leaks about that size of the bottom of a 5 gallon bucket in 2 min. of running. What kind of feedback should I leave??? Ive been holding off on doing this not sure on to say anything about it?