ARB Solenoids

Hope Springs Hauler · 09-21-2009, 09:42 AM

Quote:

Originally Posted by kyrel69

sounds like the unit is bad.
i have the same one and mine releases right away.

It vfy it is the solenoid. I would turn it on and then turn it off and unhook the air line going to the diff. If the ARB release then. You know it is the solenoid if it does not then it the the ARB it self

That is what I did. Anywhere that I release the air line it releases the pressure and the unit unlocks instantly.

I am going to call ARB as soon as they open up.

kyrel69 · 09-21-2009, 09:47 AM

Quote:

Originally Posted by Hope Springs Hauler

That is what I did. Anywhere that I release the air line it releases the pressure and the unit unlocks instantly.

I am going to call ARB as soon as they open up.

Ok just checking

Then yes the Solendoid is not working right. I think they will fix you right up and if they will not I have a place to get cheaper solenoids from that work just the the ARB one's. I will try to fine the link and post it later.

Hope Springs Hauler · 09-21-2009, 12:35 PM

The problem that I had was caused by a reversed solenoid block. my mangled set of directions apparently were destroyed in the area that says port 1-tank, port 2-air line. If this is reversed, it will not vent correctly.

All is now well and +1 for ARB Tech Support.

kyrel69 · 09-21-2009, 01:53 PM

well at least it was a easy fix for you :)

09-21-2009, 12:35 PM	#3
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	The problem that I had was caused by a reversed solenoid block. my mangled set of directions apparently were destroyed in the area that says port 1-tank, port 2-air line. If this is reversed, it will not vent correctly. All is now well and +1 for ARB Tech Support. __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

09-21-2009, 01:53 PM	#4
kyrel69 Join Date: Jan 2007 Location: Middletown, Ohio Posts: 372	well at least it was a easy fix for you :)