It has begun...

WrenchMonkey · 10-25-2009, 10:43 PM

Twenty-one minutes later, the face was stripped:

Then two hours of piecing together what I could use from mine, plus some odds-n-ends from the 90 I bought for parts, and the new(er) face I got from my buddy Tim's MJ, and I had it cobbled together well enough to work...

After that, it was only a half-hour job to get the new header cut to clear the winch, and then bolted on so I'd have headlights to take psycho-***** out for fried pickles and Island Ale.

Okay, the Ale was for me...

I plan to get all the turn signals and markers done in the morning, and see if I can swap in the wiring harness out of the 90.

Eventually, it'll get rattle-canned to match.

Robert

10-25-2009, 10:43 PM	#12
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	Twenty-one minutes later, the face was stripped: Then two hours of piecing together what I could use from mine, plus some odds-n-ends from the 90 I bought for parts, and the new(er) face I got from my buddy Tim's MJ, and I had it cobbled together well enough to work... After that, it was only a half-hour job to get the new header cut to clear the winch, and then bolted on so I'd have headlights to take psycho-*** out for fried pickles and Island Ale. Okay, the Ale was for me... I plan to get all the turn signals and markers done in the morning, and see if I can swap in the wiring harness out of the 90. Eventually, it'll get rattle-canned to match. Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP** Whatever doesn't kill you makes you stranger