buggy/auxillary heater

blustroker · 02-22-2010, 10:52 PM

best place if you have the room is between the seats with the ducts blowing at your feet. The bottom of the unit is curved to mount on the tranny tunnel. Once you have one in your hands you'll see its pretty easy. I used some 1/2" id(5/8"od) soft copper tube wrapped in foam insulation and duct tape tucked tight to the body to plumb the coolant lines. Been that way for about a year or so and have not had any issues.

sidekickproject · 02-23-2010, 08:00 AM

alright thanks man.. my heat blows really good and will run you out but im about to sell the whole body of it because i want to make an x-cab truck and dove the front and rear in..

02-22-2010, 10:52 PM	#1
blustroker woods beater Join Date: Jul 2009 Location: ryland heights ky Posts: 52	best place if you have the room is between the seats with the ducts blowing at your feet. The bottom of the unit is curved to mount on the tranny tunnel. Once you have one in your hands you'll see its pretty easy. I used some 1/2" id(5/8"od) soft copper tube wrapped in foam insulation and duct tape tucked tight to the body to plumb the coolant lines. Been that way for about a year or so and have not had any issues. __________________ 85 toyota ex cab a few goodies

02-23-2010, 08:00 AM	#2
sidekickproject DontStopTillTheCasketDrop Join Date: Jan 2010 Posts: 18	alright thanks man.. my heat blows really good and will run you out but im about to sell the whole body of it because i want to make an x-cab truck and dove the front and rear in.. __________________ you'll never know if you dont try!!