Biggin's Sammy-ish Build

biggin69 · 05-12-2010, 06:19 PM

Quote:

Originally Posted by mckeddie

your gonna wanna tie that trus in somewhere else, or your going to twist it right off.

What about something like this? Basically bend another identical tube, weld it to the axle at 90 deg. and tie the two together...

biggin69 · 05-12-2010, 06:29 PM

Or this? I have a couple diff rings that I could use. Weld a tab on the truss tube and bolt it to the diff rig that has a tab on it?

RD TRCTR · 05-13-2010, 08:17 AM

Quote:

Originally Posted by biggin69

What about something like this? Basically bend another identical tube, weld it to the axle at 90 deg. and tie the two together...

I vote for this as this should be indestrcutible.

Hope Springs Hauler · 05-13-2010, 08:30 AM

be careful about option 1. Remember to plan it so you can still service the diff.

biggin69 · 05-13-2010, 08:19 PM

Quote:

Originally Posted by Hope Springs Hauler

be careful about option 1. Remember to plan it so you can still service the diff.

That is where I am at now. I do not know what to do. I am hoping to get it sitting on its own wieght this weekend and then I will work on the details....

05-12-2010, 06:29 PM	#2
biggin69 Really??? Join Date: Sep 2009 Location: Cincy Posts: 678	Or this? I have a couple diff rings that I could use. Weld a tab on the truss tube and bolt it to the diff rig that has a tab on it? Attached Thumbnails

05-13-2010, 08:30 AM	#4
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	be careful about option 1. Remember to plan it so you can still service the diff. __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX