Truck and tractor pull

itbrokeagain · 07-11-2010, 01:07 PM

Well the fair is coming up and that means the Run What You Brung truck pull is coming up. If you were going to do this , would you run low range first or low range second. I cant decide.

Hope Springs Hauler · 07-11-2010, 03:33 PM

Motor?

superjeep · 07-11-2010, 03:45 PM

two or four wheel drive ??? automatic or manual ??????? big block chevy or small block chevy ???????? blower or nitrious ??????

multiple engines or single engine ????

blustroker · 07-11-2010, 07:10 PM

I pulled once last year in my 94.5 powerstroke F350 cc/lb 4x4 5spd w/ 4.10 gears. Tires are 285/75/16. Truck is stock except for the exhaust. I pulled in low range/ 2nd gear and it did ok. rear aired to max pres., fronts aired to 30ish. ease out to get it moving then hammer down. If it starts to hop even a little let out. Wheel hop and a 30k+lb sled don't play well on a stock truck. Best i can do for ya. I have a few friends that pull work stock trucks and this was the advice given to me on my first and only pull.

RD TRCTR · 07-11-2010, 07:30 PM

Do you mean the Cle Co Fair Stock diesel truck pull? Or the modified diesl truck pull? Share some details on the specimen that you're going to use.

itbrokeagain · 07-11-2010, 08:31 PM

Sorry I guess I should have given more details. My daughter is in 4-H and we got our Clermont Co. Fair guide. I was looking at the events and thought I wonder how my Jeep would do in the pull. Not saying that I will do it but I was wondering how I would do it if I tried.

Yj 302, T-18, 60 rear 44 front 37 boggers. I would assume they would allow it to be in 4 low.

I was thinking 4 low second gear for the wheel speed but wasnt sure if if would be low enough to get it moving.

Carwash, what did the standard shift guys do in the tow test? Any idea?

RD TRCTR · 07-11-2010, 10:55 PM

Quite honestly, they don't care what you do.

Depending on track conditions, I use 4th gear and low or 3rd gear and high. This is with a Cummins powered truck sitting on 34 inch tires and weighing about 8500 pounds.

KargoMaster · 07-11-2010, 11:56 PM

Quote:

Originally Posted by itbrokeagain

Carwash, what did the standard shift guys do in the tow test? Any idea?

Kevin ('37 Ford) and Roger ('64 Power Wagon) were about the only Manual transmissions... I was very interested in how they would do... With his wheelbase (extended), and LOTS of air in the rear tires (30psi+ is a massive volume of air in a 54" tire), Roger did pretty well (but he later blew a 205 output shaft)... Kevin dropped a rear driveshaft pretty much at the line... :o

Oh, and if you have a 6.32 1st... HELL yes, 2nd gear... but then again, (guessing)the 205 behind the T-18 is only 1.98:1...

07-11-2010, 01:07 PM	#1
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Truck and tractor pull Well the fair is coming up and that means the Run What You Brung truck pull is coming up. If you were going to do this , would you run low range first or low range second. I cant decide. __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

07-11-2010, 03:33 PM	#2
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	Motor? __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

07-11-2010, 07:10 PM	#4
blustroker woods beater Join Date: Jul 2009 Location: ryland heights ky Posts: 52	I pulled once last year in my 94.5 powerstroke F350 cc/lb 4x4 5spd w/ 4.10 gears. Tires are 285/75/16. Truck is stock except for the exhaust. I pulled in low range/ 2nd gear and it did ok. rear aired to max pres., fronts aired to 30ish. ease out to get it moving then hammer down. If it starts to hop even a little let out. Wheel hop and a 30k+lb sled don't play well on a stock truck. Best i can do for ya. I have a few friends that pull work stock trucks and this was the advice given to me on my first and only pull. __________________ 85 toyota ex cab a few goodies

07-11-2010, 08:31 PM	#6
itbrokeagain Just Empty Every Pocket - CORE Member - Join Date: Feb 2007 Location: Amelia Posts: 1,435	Sorry I guess I should have given more details. My daughter is in 4-H and we got our Clermont Co. Fair guide. I was looking at the events and thought I wonder how my Jeep would do in the pull. Not saying that I will do it but I was wondering how I would do it if I tried. Yj 302, T-18, 60 rear 44 front 37 boggers. I would assume they would allow it to be in 4 low. I was thinking 4 low second gear for the wheel speed but wasnt sure if if would be low enough to get it moving. Carwash, what did the standard shift guys do in the tow test? Any idea? __________________ 91 fj 80 on 37 Nitto Muds with a 10k winch. Cage and sliders coming soon.

07-11-2010, 03:45 PM	#3
superjeep Join Date: Jan 2007 Posts: 88	two or four wheel drive ??? automatic or manual ??????? big block chevy or small block chevy ???????? blower or nitrious ?????? multiple engines or single engine ????

07-11-2010, 07:30 PM	#5
RD TRCTR Join Date: Nov 2007 Location: Troy, OH Posts: 94	Do you mean the Cle Co Fair Stock diesel truck pull? Or the modified diesl truck pull? Share some details on the specimen that you're going to use.

07-11-2010, 10:55 PM	#7
RD TRCTR Join Date: Nov 2007 Location: Troy, OH Posts: 94	Quite honestly, they don't care what you do. Depending on track conditions, I use 4th gear and low or 3rd gear and high. This is with a Cummins powered truck sitting on 34 inch tires and weighing about 8500 pounds.