brake lines

Flxratd · 07-20-2010, 02:36 PM

yeah in a situation where im doing something for a build or myself i would be looking toward bending and flaring my own because for some dumb reason i actually like doing that but since this is stock and a customer replacement job i will be looking toward the prebent kit but thanks for the input.

thanks scott

GPER · 07-20-2010, 05:14 PM

I used the pre bent brake lines from 4wdh when I put the new frame under my CJ 10 years ago.

TomH · 07-20-2010, 08:22 PM

Also check Inline Tube. They are in the same Michigan area as Classic and offer a lot of the same stuff (SS and Otherwise.) Both are old school good.

began · 07-20-2010, 09:27 PM

what a rust bucket....at least when it totally rusts away you can buy a gently used 6 inch long arm kit for you jeep

Flxratd · 07-21-2010, 10:38 AM

Quote:

Originally Posted by began

what a rust bucket....at least when it totally rusts away you can buy a gently used 6 inch long arm kit for you jeep

you seen it you know exactly what a nice peice of @#$% im working on. i called classic tube and they said i was third in line and they would call me back. that was yesterday so i would say they spend way to much time on the phone. i will try again

thanks scott

itbrokeagain · 07-21-2010, 09:22 PM

Quote:

Originally Posted by Flxratd

you seen it you know exactly what a nice peice of @#$% im working on. i called classic tube and they said i was third in line and they would call me back. that was yesterday so i would say they spend way to much time on the phone. i will try again

thanks scott

They are horrible about calling back. I tried many times and left many messages and never heard back.

Flxratd · 07-23-2010, 01:46 PM

called back to classic tube since it seems all the venders get there lines from them anyway and talked to tim who said that they had one guy retire and one on vacation and that he was the only one there at the moment so long story short the lines are ordered and i will let you know how they look and work
thanks for the input

thanks scott

07-20-2010, 02:36 PM	#1
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	yeah in a situation where im doing something for a build or myself i would be looking toward bending and flaring my own because for some dumb reason i actually like doing that but since this is stock and a customer replacement job i will be looking toward the prebent kit but thanks for the input. thanks scott __________________ One of these days Zuk 2.0

07-23-2010, 01:46 PM	#7
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	called back to classic tube since it seems all the venders get there lines from them anyway and talked to tim who said that they had one guy retire and one on vacation and that he was the only one there at the moment so long story short the lines are ordered and i will let you know how they look and work thanks for the input thanks scott __________________ One of these days Zuk 2.0

07-20-2010, 05:14 PM	#2
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	I used the pre bent brake lines from 4wdh when I put the new frame under my CJ 10 years ago.

07-20-2010, 08:22 PM	#3
TomH Gearhead Join Date: Mar 2008 Location: Anderson Posts: 95	Also check Inline Tube. They are in the same Michigan area as Classic and offer a lot of the same stuff (SS and Otherwise.) Both are old school good.

07-20-2010, 09:27 PM	#4
began Join Date: Aug 2009 Location: Springdale OH Posts: 149	what a rust bucket....at least when it totally rusts away you can buy a gently used 6 inch long arm kit for you jeep