CORE Ultimate Adventure?

tjjeepjeep · 08-09-2010, 04:16 PM

Looks like 10/9 or 10/23 to avoid Fall Crawl and Zook Spook events.

KargoMaster · 08-12-2010, 09:07 PM

I might be able to be on standby with a trailer if needed... just thinking that might be some nice insurance...

sarge · 08-13-2010, 09:16 PM

ha ! at this point I might have my junk back on the road !!! got to take it to the dealer to have a new ECM flashed ....... hopefully have it fixed ...... I'm shooting for the benefit b ut maybe the Adventure will happen ........

flatlander757 · 08-30-2010, 09:07 PM

If I can find a place to work on my junk and swap my D300 front outputs and build some quick twin stick shifters I may be able to make it if it is the October 23 weekend... hopefully that is enough time after moving to bug the wife about more Jeep stuff

KargoMaster · 08-31-2010, 10:42 AM

tell me more of this d300 output swap... are you going 32 spl for the front (cuz that will require some machining) or just replacing stock bits... (If that is the case I have an extra stock front output if you need it...)

I know now that I will not be going on this one... (fawk drama) so I would be happy to help if I can...

flatlander757 · 08-31-2010, 07:30 PM

I have another stock D300 case that I need to swap the front outputs... I was stupid and hacked off BOTH of the shifter ears early on the build... at the time I was pretty dead-set on either cable shifters or air-actuated shifters... not I'm more a fan of keeping as much crap simple as possible.

Though I don't -need- it from you, I'll gladly throw some money or beer at you for it... I'd like to have an extra so I can get it machined for whenever I DO decide to go 32spline.

I'm probably going to eventually go to Toyota joints and 32 splines for my front shaft whenever I grenade the 1310 axleshaft/square tube abortion of a driveshaft I made... It takes a beating but I replace the joints for getting loose every time or two out... I guess a 4500ish lb jeep sitting on the front shaft and on the rev limiter will do that that

tjjeepjeep · 09-02-2010, 02:00 PM

Ok peeps. Are you serious about this? And when are we interested in it happening? October or November ? I'm wondering about Nov 6th...Too cold?

cincygman · 09-03-2010, 07:21 AM

Lets see, if I can swap leafspring, build new front driveshaft, replace power steering hose, install ford 8.8.....................

Red Dog · 09-12-2010, 06:29 PM

The 9th i can do, going out of town the weekend of the 23rd. Is there an option to meet up on saturday morning at haspen then again on sunday morning. My better half doesn't do the camping thing.

Jon

Red Dog · 09-12-2010, 06:44 PM

my fault i missed pages 2 and 3. I can do Nov. 5 weekend. Other items still apply, if i go by myself i can camp, if i bring the rest of the crew we can meet you there. If we go to a hotel, we might as well run home and meet ya at big rock. Is this set in stone yet?

tjjeepjeep · 09-12-2010, 07:34 PM

Quote:

Originally Posted by Red Dog

Is this set in stone yet?

Only thing set in stone is the date. We're definitely doing something at a couple places. Still deciding the places and rules associated. More at the meeting and will publish details.

08-09-2010, 04:16 PM	#1
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	Looks like 10/9 or 10/23 to avoid Fall Crawl and Zook Spook events. __________________ I want to be the reason you look down at your phone and smile........then walk into a pole.

08-12-2010, 09:07 PM	#2
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	I might be able to be on standby with a trailer if needed... just thinking that might be some nice insurance... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

08-31-2010, 10:42 AM	#5
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	tell me more of this d300 output swap... are you going 32 spl for the front (cuz that will require some machining) or just replacing stock bits... (If that is the case I have an extra stock front output if you need it...) I know now that I will not be going on this one... (fawk drama) so I would be happy to help if I can... __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

09-02-2010, 02:00 PM	#7
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	Ok peeps. Are you serious about this? And when are we interested in it happening? October or November ? I'm wondering about Nov 6th...Too cold? __________________ I want to be the reason you look down at your phone and smile........then walk into a pole.

09-03-2010, 07:21 AM	#8
cincygman Join Date: Nov 2008 Location: Pleasant Run Farms (near Fairfield) Posts: 378	Lets see, if I can swap leafspring, build new front driveshaft, replace power steering hose, install ford 8.8..................... __________________ Romans 7-8

08-13-2010, 09:16 PM	#3
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	ha ! at this point I might have my junk back on the road !!! got to take it to the dealer to have a new ECM flashed ....... hopefully have it fixed ...... I'm shooting for the benefit b ut maybe the Adventure will happen ........

08-30-2010, 09:07 PM	#4
flatlander757 Fartface extrordinair Join Date: Aug 2010 Location: West Carrollton Posts: 127	If I can find a place to work on my junk and swap my D300 front outputs and build some quick twin stick shifters I may be able to make it if it is the October 23 weekend... hopefully that is enough time after moving to bug the wife about more Jeep stuff

08-31-2010, 07:30 PM	#6
flatlander757 Fartface extrordinair Join Date: Aug 2010 Location: West Carrollton Posts: 127	I have another stock D300 case that I need to swap the front outputs... I was stupid and hacked off BOTH of the shifter ears early on the build... at the time I was pretty dead-set on either cable shifters or air-actuated shifters... not I'm more a fan of keeping as much crap simple as possible. Though I don't -need- it from you, I'll gladly throw some money or beer at you for it... I'd like to have an extra so I can get it machined for whenever I DO decide to go 32spline. I'm probably going to eventually go to Toyota joints and 32 splines for my front shaft whenever I grenade the 1310 axleshaft/square tube abortion of a driveshaft I made... It takes a beating but I replace the joints for getting loose every time or two out... I guess a 4500ish lb jeep sitting on the front shaft and on the rev limiter will do that that

09-12-2010, 06:29 PM	#9
Red Dog Red Dog Join Date: Jul 2010 Location: Delhi Posts: 115	The 9th i can do, going out of town the weekend of the 23rd. Is there an option to meet up on saturday morning at haspen then again on sunday morning. My better half doesn't do the camping thing. Jon

09-12-2010, 06:44 PM	#10
Red Dog Red Dog Join Date: Jul 2010 Location: Delhi Posts: 115	my fault i missed pages 2 and 3. I can do Nov. 5 weekend. Other items still apply, if i go by myself i can camp, if i bring the rest of the crew we can meet you there. If we go to a hotel, we might as well run home and meet ya at big rock. Is this set in stone yet?