dodge v10 lost power

frankensteinxj · 11-07-2010, 07:19 PM

Hey guys, I have a 1999 dodge 3500 with a V10. The truck has 125000 miles But the motor is a remanufactured motor from Jasper with only 10,000 miles on it. Yesterday as i was driving it lost a lot of power. It doesnt have cat converters on it. Im not sure where to begin. It is holding 45lbs of fuel pressure? Has anyone had similiar problems? Any and all help is appreciated.

boomhauer · 11-08-2010, 10:53 AM

no noise?, just lost power

94Dodge Truggy · 11-08-2010, 11:02 AM

injector or coil pack? pull the codes?

frankensteinxj · 11-08-2010, 03:54 PM

It doesnt backfire or sound any different at all. Im thinking maybe it could be the torque converter? When i first give it gas it feels like it is going to go for about half of a second but then it just has no balls. It feels like there is a 4cylinder in my dually at this point.

jwend · 11-08-2010, 05:47 PM

Alot of time if it is yer torq converter it will have a shutter... like pater said run yer codes.

11-07-2010, 07:19 PM	#1
frankensteinxj Join Date: Jun 2009 Location: Goshen Posts: 336	dodge v10 lost power Hey guys, I have a 1999 dodge 3500 with a V10. The truck has 125000 miles But the motor is a remanufactured motor from Jasper with only 10,000 miles on it. Yesterday as i was driving it lost a lot of power. It doesnt have cat converters on it. Im not sure where to begin. It is holding 45lbs of fuel pressure? Has anyone had similiar problems? Any and all help is appreciated. __________________ BYAAH!!!

11-08-2010, 10:53 AM	#2
boomhauer Join Date: Mar 2008 Posts: 188	no noise?, just lost power __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

11-08-2010, 11:02 AM	#3
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	injector or coil pack? pull the codes? __________________

11-08-2010, 03:54 PM	#4
frankensteinxj Join Date: Jun 2009 Location: Goshen Posts: 336	It doesnt backfire or sound any different at all. Im thinking maybe it could be the torque converter? When i first give it gas it feels like it is going to go for about half of a second but then it just has no balls. It feels like there is a 4cylinder in my dually at this point. __________________ BYAAH!!!

11-08-2010, 05:47 PM	#5
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Alot of time if it is yer torq converter it will have a shutter... like pater said run yer codes. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad: