5.3 chevy, auto setup

Trigger · 12-04-2010, 07:26 AM

Quote:

Originally Posted by 94Dodge Truggy

what year was it? Do not want drive by wire.

I'm not sure. Here is their information if you want to give them a call. Pretty good folks to work with.

Valley Auto Parts

1800 Valley Street
Dayton, OH 45404-2218
(937) 228-6000

ThePeanutsGang · 12-04-2010, 11:21 AM

For your wiring harness you may also want to check with these guys: http://www.centechwire.com/
I have used Painless, Ron Francis and by far Centech is the best as far as quality and ease of installation

bgwyllys61 · 12-06-2010, 11:35 PM

dont know if this helps or not, and im not sure about the price either, these things sell for this much?
http://lexington.craigslist.org/pts/2098582967.html

94Dodge Truggy · 12-07-2010, 06:56 AM

Quote:

Originally Posted by bgwyllys61

dont know if this helps or not, and im not sure about the price either, these things sell for this much?
http://lexington.craigslist.org/pts/2098582967.html

that is over priced by 1,000.00.

BIGRAM · 12-07-2010, 01:49 PM

Here is another in KY. $500

http://lexington.craigslist.org/pts/2099031599.html

tubehead · 12-07-2010, 07:08 PM

I know alot of guys using Jims Performance for their harness. If you get an engine be sure to get the harness and computer with it. As stated above $300-$400 is the going rate to have the computer reflashed and the harness cut down.

mckeddie · 12-07-2010, 10:23 PM

there's a guy up here outside columbia city that does them reasonably, that's who did joey's. thinking joey paid around 3ish for his.

greg

94Dodge Truggy · 12-08-2010, 03:16 PM

Quote:

Originally Posted by BIGRAM

Here is another in KY. $500

http://lexington.craigslist.org/pts/2099031599.html

that one looks a bit weathered!

BIGRAM · 12-08-2010, 04:37 PM

Quote:

Originally Posted by 94Dodge Truggy

that one looks a bit weathered!

Thought it may still be in running condition where you could check it out. I assume it is a wrecked vehicle.

12-04-2010, 11:21 AM	#2
ThePeanutsGang Join Date: Jun 2008 Location: west alexandria Posts: 9	For your wiring harness you may also want to check with these guys: http://www.centechwire.com/ I have used Painless, Ron Francis and by far Centech is the best as far as quality and ease of installation __________________ If you can't fix it with a hammer,you have an electrical problem

12-07-2010, 01:49 PM	#5
BIGRAM Ready to Wheel!!!!!!! Join Date: Jul 2009 Location: Stanton, KY Posts: 263	Here is another in KY. $500 http://lexington.craigslist.org/pts/2099031599.html __________________ 1994 Dodge Ram 5.9L SWB 3/4 axles, 39.5 IROKS, HYDRO assist

12-07-2010, 07:08 PM	#6
tubehead Join Date: Apr 2008 Location: Grayson KY Posts: 35	I know alot of guys using Jims Performance for their harness. If you get an engine be sure to get the harness and computer with it. As stated above $300-$400 is the going rate to have the computer reflashed and the harness cut down. __________________ www.roarkfabrication.com

12-07-2010, 10:23 PM	#7
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	there's a guy up here outside columbia city that does them reasonably, that's who did joey's. thinking joey paid around 3ish for his. greg __________________ zuk buggy.....it'll be a jeep eventually.

12-06-2010, 11:35 PM	#3
bgwyllys61 fullwidthxj Join Date: Feb 2008 Location: lex Posts: 15	dont know if this helps or not, and im not sure about the price either, these things sell for this much? http://lexington.craigslist.org/pts/2098582967.html