my new toy - Page 3

krawlin85toy · 01-13-2011, 11:47 AM

Quote:

Originally Posted by carwash

interested to see how the joints work out for you...

do yours use that insanely retarded metric size thru bolt?

yes I think they are metric.

94Dodge Truggy · 01-13-2011, 11:59 AM

I guess metric is good as most of the rig is as well?

krawlin85toy · 01-13-2011, 12:08 PM

Quote:

Originally Posted by 94Dodge Truggy

I guess metric is good as most of the rig is as well?

funny you say that,most all vehicles are metric now!

jwend · 01-13-2011, 01:26 PM

Get spares of that bolt!!! if you shear or lose one (JamieL) they are impossible to find local to any park.

94Dodge Truggy · 01-13-2011, 01:34 PM

Quote:

Originally Posted by krawlin85toy

funny you say that,most all vehicles are metric now!

dodge is in cahoots with craftsman tools and uses both standard and metric. :mad:

carwash · 01-13-2011, 01:51 PM

This was my point... they are unavailable anywhere... i have heard nightmares about this, and about these joints in general.

krawlin85toy · 01-13-2011, 02:04 PM

Quote:

Originally Posted by jwend

Get spares of that bolt!!! if you shear or lose one (JamieL) they are impossible to find local to any park.

he lost spring hanger bolt,and was greasable.
The bolts i will look should be ?

krawlin85toy · 01-21-2011, 10:23 PM

ruff install,still have more trimming and final fit before the welding begins.

gothodgie · 01-21-2011, 11:06 PM

looking good George

... are you going to make a small window on the side behind the back door or just fill it in ?

krawlin85toy · 01-22-2011, 10:22 AM

Quote:

Originally Posted by gothodgie

looking good George

... are you going to make a small window on the side behind the back door or just fill it in ?

i will fill it in once i figure out how close i can get it.

944drsk · 01-22-2011, 10:34 PM

Looking good! If ya need some help one evening let me know, Extra set hands or eyes might be helpful...maybe...:(

krawlin85toy · 01-23-2011, 10:21 AM

Quote:

Originally Posted by 944drsk

Looking good! If ya need some help one evening let me know, Extra set hands or eyes might be helpful...maybe...:(

Thanks i will let you know.

Tool Man · 01-24-2011, 05:08 PM

Quote:

Originally Posted by krawlin85toy

Thanks i will let you know.

He needs help alright.Only he needs 4padded walls.On second thought a velcro wall will also do.

krawlin85toy · 01-25-2011, 12:58 PM

may be true, but you are allready stuck to that wall!

Tool Man · 01-25-2011, 05:13 PM

Quote:

Originally Posted by krawlin85toy

may be true, but you are allready stuck to that wall!

Hey you can wait your turn

By the way how do i get down from here?

94Dodge Truggy · 01-25-2011, 08:57 PM

Be sure not to put too much time and $ into this build as it will upset you to beat on it then. That car you were hauling last night have the donor motor in it?

krawlin85toy · 01-26-2011, 09:54 AM

Quote:

Originally Posted by 94Dodge Truggy

Be sure not to put too much time and $ into this build as it will upset you to beat on it then. That car you were hauling last night have the donor motor in it?

have to put a little time into it,upset or not its a slow painful process.
No donor,cust. car,besides it a hyundia!

krawlin85toy · 01-26-2011, 09:57 AM

Quote:

Originally Posted by Tool Man

Hey you can wait your turn

By the way how do i get down from here?

sorry i forgot elders first!

,and your stuck to the wall till someone desides to get you down. hope you used te restroom before you leaped!

Tool Man · 01-26-2011, 05:21 PM

Quote:

Originally Posted by krawlin85toy

sorry i forgot elders first!

,and your stuck to the wall till someone desides to get you down. hope you used te restroom before you leaped!

I just knew the last 2 buckets of beer was a mistake!!

krawlin85toy · 01-27-2011, 10:12 PM

got a little more work done tonight. slowly stiching the back of the cab in,also closing in where the windows once were.

whacko810 · 01-27-2011, 11:13 PM

Looking really good. Can't wait to start cutting up old blue

Hope Springs Hauler · 01-28-2011, 08:37 AM

it is looking better than you were giving yourself credit for. Keep plugging along.

94Dodge Truggy · 01-28-2011, 11:37 AM

If you need me and my hammer and dollie I will swing on by and help with the bodywork.

krawlin85toy · 01-28-2011, 12:07 PM

Quote:

Originally Posted by 94Dodge Truggy

If you need me and my hammer and dollie I will swing on by and help with the bodywork.

seen your body work!

sorry not buying 1/4 steel plates.

krawlin85toy · 01-28-2011, 12:08 PM

Quote:

Originally Posted by Hope Springs Hauler

it is looking better than you were giving yourself credit for. Keep plugging along.

Pixs always look better than in person, unless its a person camera adds 10lbs.:o

01-13-2011, 11:59 AM	#52
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I guess metric is good as most of the rig is as well? __________________

01-13-2011, 01:26 PM	#54
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Get spares of that bolt!!! if you shear or lose one (JamieL) they are impossible to find local to any park. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

01-13-2011, 01:51 PM	#56
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	This was my point... they are unavailable anywhere... i have heard nightmares about this, and about these joints in general. __________________

01-21-2011, 10:23 PM	#58
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	ruff install,still have more trimming and final fit before the welding begins. Attached Thumbnails

01-21-2011, 11:06 PM	#59
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	looking good George ... are you going to make a small window on the side behind the back door or just fill it in ? __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

01-22-2011, 10:34 PM	#61
944drsk 1986 4runner Join Date: Nov 2008 Location: Monroe, Ohio Posts: 38	Looking good! If ya need some help one evening let me know, Extra set hands or eyes might be helpful...maybe...:(

01-25-2011, 12:58 PM	#64
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	may be true, but you are allready stuck to that wall!

01-25-2011, 08:57 PM	#66
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Be sure not to put too much time and $ into this build as it will upset you to beat on it then. That car you were hauling last night have the donor motor in it? __________________

01-27-2011, 10:12 PM	#70
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	got a little more work done tonight. slowly stiching the back of the cab in,also closing in where the windows once were. Attached Thumbnails

01-27-2011, 11:13 PM	#71
whacko810 Join Date: Apr 2009 Location: Ross Posts: 70	Looking really good. Can't wait to start cutting up old blue

01-28-2011, 08:37 AM	#72
Hope Springs Hauler Join Date: Jul 2008 Location: Hamilton, OH Posts: 431 Images: 16	it is looking better than you were giving yourself credit for. Keep plugging along. __________________ 1988 Suzuki Samurai on propane FJ 40 axles (4.10) 5.14 tcase 36" TSL SX

01-28-2011, 11:37 AM	#73
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	If you need me and my hammer and dollie I will swing on by and help with the bodywork. __________________