Toyota Rear disc brakes issue

Hotwheels · 02-22-2011, 06:44 AM

calipers have bleeders are on top, I have power bleed the brakes, I bench bleed the new master.

Hotwheels · 02-22-2011, 07:55 PM

Quote:

Originally Posted by stickman

your fix might be simple. I've found that the 1" bore rule doesn't apply to all. For a long time I was in the same boat. Then I went to a GM 1-1/8 MC and all my problems disappeared. I've got a nice strong pedal with a great grab. I was shocked at what an 1/8th increase does for a spongy pedal.

That what I found out today. The 1" bore toyota master is not pushing enough fluid causeing the low and spongy pedal in my 4runner. I am going to buy the rockstomper GM master and bracket to fix the issue.

Hotwheels · 02-22-2011, 08:47 PM

I have been PMing ericb on pirate and have been reading his stuff for a few days now. I can fab it up right now I will have to let it sit because I have other things I need to work on at work.

gothodgie · 02-22-2011, 08:58 PM

i got some 1/4" plate if you need a piece...

02-22-2011, 08:58 PM	#7
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	i got some 1/4" plate if you need a piece... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

02-22-2011, 06:44 AM	#1
Hotwheels Join Date: Aug 2010 Location: Maineville, Ohio Posts: 125	calipers have bleeders are on top, I have power bleed the brakes, I bench bleed the new master.

02-22-2011, 08:47 PM	#6
Hotwheels Join Date: Aug 2010 Location: Maineville, Ohio Posts: 125	I have been PMing ericb on pirate and have been reading his stuff for a few days now. I can fab it up right now I will have to let it sit because I have other things I need to work on at work.