Welder issues

jfiscus · 06-08-2011, 09:07 AM

Pull the trigger with the cover open if it has a cover. See if the feed wheels are turning & in-turn feeding the wire through them. If the wire's feeding fine there then I would assume the liner needs replaced.

gothodgie · 06-08-2011, 11:40 AM

you might just be hitting it's duty cycle, and after it cools down it starts working again...

93 Krawler · 06-08-2011, 12:11 PM

Quote:

Originally Posted by gothodgie

you might just be hitting it's duty cycle, and after it cools down it starts working again...

Yeah, if it works and then stops, it's either the electronics are messed up or hitting the duty cycle. It depends on how long you are using it before it stops feeding.

oklahomawelder · 06-08-2011, 12:24 PM

Quote:

Originally Posted by gothodgie

you might just be hitting it's duty cycle, and after it cools down it starts working again...

THIS^^^^^ would be my bet.....

gothodgie · 06-08-2011, 02:24 PM

Quote:

Originally Posted by oklahomawelder

THIS^^^^^ would be my bet.....

yea those little welders don't have much of a duty cycle if i remember right.. It should tell ya about it in the manual if you still have it laying around...

67fastback · 06-08-2011, 10:11 PM

did not think of the duty cycle...

crap..that might be it, it is a century welder... and lifted the cover and it did not spin the wheels to feed at all..so leaning towards duty cycle.. i know about the kinks int he line and size of wire checked all that .030 is just fine for it..

Nuts · 06-09-2011, 06:35 AM

Is this the welder I used to have? If so just throw it away and buy a new one because its not worth fixing

oklahomawelder · 06-09-2011, 10:56 AM

Its probably about 20% Duty cycle. That is you can weld for 2 minutes in 10 minutes at a set amperage before it will shut off to cool down.....

67fastback · 06-10-2011, 01:58 AM

Quote:

Originally Posted by Nuts

Is this the welder I used to have? If so just throw it away and buy a new one because its not worth fixing

yes it is...

06-08-2011, 11:40 AM	#2
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	you might just be hitting it's duty cycle, and after it cools down it starts working again... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

06-08-2011, 10:11 PM	#6
67fastback Splattt- you want some Join Date: Mar 2007 Location: Mason,Oh Posts: 692	did not think of the duty cycle... crap..that might be it, it is a century welder... and lifted the cover and it did not spin the wheels to feed at all..so leaning towards duty cycle.. i know about the kinks int he line and size of wire checked all that .030 is just fine for it.. __________________ Thanks, 67fastback ------------- 84 Honda cr60r - for sale 87 Honda 200sx - for sale 67 Mustang fastback - under restoration MCA #63430 04 Silverado 2500 crew cab 87 sami - "SPLAT" 87 sami tin top - "Blue Fire" 88 sami - "Squirt" My New Video Channel -http://www.youtube.com/PhillbillyProduction My Video Channel - http://www.youtube.com/justworkn

06-08-2011, 09:07 AM	#1
jfiscus Terrain Stomper Join Date: Feb 2007 Location: Crittenden, KY Posts: 633	Pull the trigger with the cover open if it has a cover. See if the feed wheels are turning & in-turn feeding the wire through them. If the wire's feeding fine there then I would assume the liner needs replaced.

06-09-2011, 06:35 AM	#7
Nuts Join Date: Feb 2008 Location: middletown,oh Posts: 508	Is this the welder I used to have? If so just throw it away and buy a new one because its not worth fixing

06-09-2011, 10:56 AM	#8
oklahomawelder Tradin' Fool Join Date: Nov 2010 Location: Oklahoma Posts: 86	Its probably about 20% Duty cycle. That is you can weld for 2 minutes in 10 minutes at a set amperage before it will shut off to cool down.....