Ford front 60 and chevy 14 bolt built

Redriverranger · 12-20-2011, 08:21 PM

The front is a Ford drivers drop high pinion ball joint dana 60 with new 5.13
gears and a new detroit locker. It has all new ball joints and rotors and
needs one caliper. They have surface rust from sitting outside. The brake lines and hoses are all new as well. It has brand new USA chrome moly 35 spline axles inner and outer and the unit
bearings have been redrilled for 8x6.5 pattern with a spare unit bearing.
It won't have u-joints or lock outs. It has one high steer arm, and dom
tubing between the knuckles with new tie rod ends. It has coil over mounts
and link mounts and is set up for 3 link front with a panard bar. The rear
is a 14 bolt with 5.13 gears and I was told some type of locker. The ring gear
has been shaved but the housing has not. It has new disc brakes, rotors,
calipers, hoses, lines. It has 1/2" plate truss, coilover brackets, and
lower link brackets for 4 link, as well as leaf spring perches. It also
has a nice pinion guard tied into the truss. I need $2K for the pair.

boomhauer · 12-21-2011, 11:49 PM

i will trade you a set of 4:56's for your 5:13's and you keep the lockers. i will even come up and do all the labor.

Redriverranger · 01-08-2012, 06:38 AM

Bump

Redriverranger · 02-04-2012, 01:49 PM

If anyones building, I still have these. You can't build them for anywhere close to this.

Lasher · 02-08-2012, 07:54 PM

Would you be willing to seperate? I just need the 60.

Redriverranger · 02-09-2012, 12:07 AM

Sale is pending. I want them to go as a pair, but if something changes, I will let you know.

The Eye · 02-15-2012, 06:07 PM

Do you still have them or did they sell.. Thanks

Redriverranger · 02-15-2012, 08:44 PM

They are supposed to be picked up tomorrow night, at this point..

Redriverranger · 02-17-2012, 07:00 AM

Sold

12-20-2011, 08:21 PM	#1
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Ford front 60 and chevy 14 bolt built The front is a Ford drivers drop high pinion ball joint dana 60 with new 5.13 gears and a new detroit locker. It has all new ball joints and rotors and needs one caliper. They have surface rust from sitting outside. The brake lines and hoses are all new as well. It has brand new USA chrome moly 35 spline axles inner and outer and the unit bearings have been redrilled for 8x6.5 pattern with a spare unit bearing. It won't have u-joints or lock outs. It has one high steer arm, and dom tubing between the knuckles with new tie rod ends. It has coil over mounts and link mounts and is set up for 3 link front with a panard bar. The rear is a 14 bolt with 5.13 gears and I was told some type of locker. The ring gear has been shaved but the housing has not. It has new disc brakes, rotors, calipers, hoses, lines. It has 1/2" plate truss, coilover brackets, and lower link brackets for 4 link, as well as leaf spring perches. It also has a nice pinion guard tied into the truss. I need $2K for the pair. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

12-21-2011, 11:49 PM	#2
boomhauer Join Date: Mar 2008 Posts: 188	i will trade you a set of 4:56's for your 5:13's and you keep the lockers. i will even come up and do all the labor. __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

01-08-2012, 06:38 AM	#3
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Bump __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

02-04-2012, 01:49 PM	#4
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	If anyones building, I still have these. You can't build them for anywhere close to this. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

02-09-2012, 12:07 AM	#6
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	Sale is pending. I want them to go as a pair, but if something changes, I will let you know. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

02-08-2012, 07:54 PM	#5
Lasher Join Date: Aug 2011 Posts: 13	Would you be willing to seperate? I just need the 60.

02-15-2012, 06:07 PM	#7
The Eye The Rox Box Join Date: Nov 2011 Posts: 4	Do you still have them or did they sell.. Thanks

02-15-2012, 08:44 PM	#8
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	They are supposed to be picked up tomorrow night, at this point.. __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character

02-17-2012, 07:00 AM	#9
Redriverranger White ranger guy Join Date: Nov 2007 Location: Red river gorge,ky Posts: 274	sold Sold __________________ 91 Ranger ext cab, 60, 14 bolt, 4:88's, 39.5's, doubler, lot's of character