A question for you carpenters..

yellowjacket · 05-04-2012, 12:32 PM

Quote:

Originally Posted by Hope Springs Hauler

Maybe consider using drilled and epoxied anchors for your sole plate

Not familiar w epoxied anchors...

Sent from my LS670 using Tapatalk

eighty3bronco · 05-04-2012, 05:43 PM

If you wanted to keep the same foot print, couldn't you cut out around where the pos pouts were then just pour concrete into the open hole and tie everything together?

GPER · 05-04-2012, 06:24 PM

Your slab is on top of the ground so the edges could become unsupported with erosion. With all of the weight of the building on the edges it could stress the edge. I would do a footer and do you have building codes that you have to follow and then you have the question. Will insurance insure a building built that way???

05-04-2012, 05:43 PM	#2
eighty3bronco anywhere but there Join Date: Jan 2007 Location: Blanchester, Oh Posts: 174	If you wanted to keep the same foot print, couldn't you cut out around where the pos pouts were then just pour concrete into the open hole and tie everything together? __________________

05-04-2012, 06:24 PM	#3
GPER Join Date: Feb 2007 Location: Kettering, Ohio Posts: 811	Your slab is on top of the ground so the edges could become unsupported with erosion. With all of the weight of the building on the edges it could stress the edge. I would do a footer and do you have building codes that you have to follow and then you have the question. Will insurance insure a building built that way???