HP D60 Passenger side drop?

blazerbrad · 01-17-2017, 12:35 PM

For the 14-bolt, assuming you haven't touched it you can trim off the lip that hangs down on the bottom edge and smooth it out. You can easily gain 3/4" of clearance and make it slide over obstacles easier because you don't have the big "hook" hanging down. I re-used the factory diff cover by trimming off the bottom and reinforcing it. Of course I'm cheap and this only cost me a few cut-off and grinding wheels and a few hours of time.

01-17-2017, 12:35 PM	#1
blazerbrad - CORE Member - Join Date: Feb 2007 Posts: 831 Images: 6	For the 14-bolt, assuming you haven't touched it you can trim off the lip that hangs down on the bottom edge and smooth it out. You can easily gain 3/4" of clearance and make it slide over obstacles easier because you don't have the big "hook" hanging down. I re-used the factory diff cover by trimming off the bottom and reinforcing it. Of course I'm cheap and this only cost me a few cut-off and grinding wheels and a few hours of time.