Project Low and Lean Rustbucket ( LLR ) - Page 2

sarge · 04-07-2011, 12:57 PM

Yep the 30 and 35 are going under the Jimmy with the 33" TSL's . Going to lower it a little bit and see what I think . May sell it , May keep it . Might look at trading it for a quad or towards a side by side ????

tom tom · 04-07-2011, 09:21 PM

looks good cant wait to see it done

sarge · 04-14-2011, 09:19 AM

Well , after having to go to Newark for a three day waste of time :mad: , I finally got back to work on the rig . Got the cage final burned in , but I might add a bar or two in the back .... floors are all welded up and filled in , going to paint the cage today and then line the floor .. one more go around with filler and primer and it's paint time. Speaking of paint .... I have changed paint colors

cage, crusher corners, boat sides and bumpers will be hammered silver and the body will be Sub-lime green pearl .

I went to the paint store to get paint for my sons car and fell in love with the color .....

yellowjacket · 04-14-2011, 09:25 AM

Like a radioactive booger goin down the trail

94Dodge Truggy · 04-14-2011, 09:26 AM

when are the 60's goin under it? Lime green with a yellow cage!

sarge · 04-14-2011, 10:33 AM

Quote:

Originally Posted by 94Dodge Truggy

when are the 60's goin under it? Lime green with a yellow cage!

UMMM NO to the YELLOW and Green

I'm going to leave the stockers under it for a little while , I have a honey do list that needs tending to befor the swap. I woul say a month maybe less.

RuffedUpXJ · 04-15-2011, 07:48 AM

Cage needs more triangulation.

J/K Looks good Mike.

T-bird · 04-15-2011, 08:33 AM

I really like this build, but kind of wish you ran it on the 33's for a while. I would like to know what a Jeep could do if it was fully built on 33's. I feel like there are a lot of guys out there that think it takes 37's to do particular trails and it would be funny to see you roll by them on 33's.

sarge · 04-15-2011, 11:34 AM

Quote:

Originally Posted by T-bird

I really like this build, but kind of wish you ran it on the 33's for a while. I would like to know what a Jeep could do if it was fully built on 33's. I feel like there are a lot of guys out there that think it takes 37's to do particular trails and it would be funny to see you roll by them on 33's.

I'm going to run it on 33's for a little while until my play fund recovers or I break it and then it's 60 time....

sarge · 04-15-2011, 12:08 PM

Got the tail gate fixed and armored up , I lost out on the CJ tail gate :mad: so I made this one work with some plate and some speed holes

she's almost ready for some color .......

gothodgie · 04-15-2011, 12:21 PM

i can't wait to see how the green looks...

94Dodge Truggy · 04-15-2011, 08:33 PM

I am tellin ya lime green and flourescent yellow with a hint of cheez-it orange would be tits! Green on the body, yellow on the cage and rims and orange on the axles! Do it.

gothodgie · 04-15-2011, 08:47 PM

Quote:

Originally Posted by 94Dodge Truggy

I am tellin ya lime green and flourescent yellow with a hint of cheez-it orange would be tits! Green on the body, yellow on the cage and rims and orange on the axles! Do it.

that would be sweet... But i don't think i could drive....

sarge · 04-21-2011, 11:03 AM

been a while since any photos have been posted , but all I have been doing is body work , final cage welds and other boring things , I did get one of the crusher corners roughed in :

kingchango · 04-21-2011, 12:22 PM

natty light

sarge · 04-22-2011, 10:30 AM

a few more holes got punched last night ... just for fun !!!

94Dodge Truggy · 04-22-2011, 10:53 AM

You have the rear wheel wells opened enough to clear 42" tires with the tons down the road?

sarge · 04-22-2011, 11:19 AM

With the full widths and dove tail ..... it shouldn't be a problem

krawlin85toy · 04-22-2011, 09:31 PM

plates look good!!!! So how did you finaly get the holes punched out?

sarge · 04-24-2011, 02:04 AM

had to resort to the drill press and a hole saw .... The knock out just wouldn't cut it .

sarge · 04-28-2011, 08:41 AM

Well it's been awhile since I posted any up dates and due to this wonderful weather we have been having it has been kinda rough on the garage/shade tree guy, and I tore a legament in my elbow moving a big screen out of my basement ....... makes it very painful to try and do fab work and body work.

I got everything prepped and ran into a slight problem with the windshield motor ...... it hits the cage . I have two choices , one is to notch the cross bar about .25" to allow the motor to pass or , two , just remove it and keep the windshield rainXed .

Got it in the final primer coat last night , with the looks of the weather I'm hoping to have it in paint this week end .

Seats are on there way and then the frame gets blasted and painted , still looking for harnesses , just can't decide what ones I want. Then I get to clean the dust off all the parts and put it back together.

Flxratd · 04-28-2011, 09:44 AM

i see the hood line has changed from the first cut and tube fenders ? new fender design or no fender now ?

as far as your arm i say stick to the 12oz curls and you wont have any trouble

sarge · 04-28-2011, 11:24 AM

no fenders , once I put the 60's under it it will not matter anyway :) ,

I may add a tube that follow the High line , I already added steel plate to the tub so that if I decide to add the tube I have a good attachment point.

Takeing a vacation day tomorrow so I might be spraying color

Fed Ex says seats will be at the house Sat. morning ....... once there in I can finish the cage and seat mounts and ......... maybe drive it !

And as for the 12 oz curls ...... yes doctor I will take your advise and increase my reps.

sarge · 05-02-2011, 09:31 AM

well it's green ....... still waiting on seats, they should be waiting for me at the house when I get off work today .

tom tom · 05-02-2011, 09:51 AM

that looks nice good job sarge

04-07-2011, 09:21 PM	#27
tom tom tommy Join Date: May 2010 Location: Franklin Oh Posts: 69	looks good cant wait to see it done __________________ 08 jeep Sahara soon to be with 33s

04-14-2011, 09:26 AM	#30
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	when are the 60's goin under it? Lime green with a yellow cage! __________________

04-15-2011, 07:48 AM	#32
RuffedUpXJ On XJ 2 Now Join Date: Feb 2007 Location: Fairfield Twp. Posts: 314	Cage needs more triangulation. J/K Looks good Mike. __________________ 88 XJ - 5" lift - 35" BFG's - Bumpers - Rock Rails - Homebrewed OBA - Roof Rack - Tube Doors - Trimmed - Dented 87 XJ - D44 - Disco D30 - 235's - 231TC - Stock for now

04-15-2011, 12:21 PM	#36
gothodgie Join Date: May 2009 Location: loveland Posts: 843 Images: 49	i can't wait to see how the green looks... __________________ chris hodges 96 fzj80 3x locked, 4"lift, 37s, homebrew sliders and bumpers,a work in progress 71 fj55, SOA, locked...The jungle bus... retired

04-15-2011, 08:33 PM	#37
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I am tellin ya lime green and flourescent yellow with a hint of cheez-it orange would be tits! Green on the body, yellow on the cage and rims and orange on the axles! Do it. __________________

04-07-2011, 12:57 PM	#26
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Yep the 30 and 35 are going under the Jimmy with the 33" TSL's . Going to lower it a little bit and see what I think . May sell it , May keep it . Might look at trading it for a quad or towards a side by side ????

04-14-2011, 09:19 AM	#28
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Well , after having to go to Newark for a three day waste of time :mad: , I finally got back to work on the rig . Got the cage final burned in , but I might add a bar or two in the back .... floors are all welded up and filled in , going to paint the cage today and then line the floor .. one more go around with filler and primer and it's paint time. Speaking of paint .... I have changed paint colors cage, crusher corners, boat sides and bumpers will be hammered silver and the body will be Sub-lime green pearl . I went to the paint store to get paint for my sons car and fell in love with the color .....

04-14-2011, 09:25 AM	#29
yellowjacket barely breathing Join Date: Mar 2008 Location: alexandria, ky Posts: 889	Like a radioactive booger goin down the trail

04-15-2011, 08:33 AM	#33
T-bird Join Date: Sep 2010 Location: Centerville Posts: 123	I really like this build, but kind of wish you ran it on the 33's for a while. I would like to know what a Jeep could do if it was fully built on 33's. I feel like there are a lot of guys out there that think it takes 37's to do particular trails and it would be funny to see you roll by them on 33's.

04-15-2011, 12:08 PM	#35
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Got the tail gate fixed and armored up , I lost out on the CJ tail gate :mad: so I made this one work with some plate and some speed holes she's almost ready for some color .......

04-21-2011, 11:03 AM	#39
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	been a while since any photos have been posted , but all I have been doing is body work , final cage welds and other boring things , I did get one of the crusher corners roughed in :

04-21-2011, 12:22 PM	#40
kingchango . Join Date: Jun 2007 Location: Ohio Posts: 34	natty light __________________ 01 TJ

04-22-2011, 10:30 AM	#41
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	a few more holes got punched last night ... just for fun !!!

04-22-2011, 10:53 AM	#42
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	You have the rear wheel wells opened enough to clear 42" tires with the tons down the road? __________________

04-22-2011, 11:19 AM	#43
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	With the full widths and dove tail ..... it shouldn't be a problem

04-22-2011, 09:31 PM	#44
krawlin85toy Join Date: May 2007 Location: Hamilton Posts: 265 Images: 76	plates look good!!!! So how did you finaly get the holes punched out?

04-24-2011, 02:04 AM	#45
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	had to resort to the drill press and a hole saw .... The knock out just wouldn't cut it .

04-28-2011, 08:41 AM	#46
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	Well it's been awhile since I posted any up dates and due to this wonderful weather we have been having it has been kinda rough on the garage/shade tree guy, and I tore a legament in my elbow moving a big screen out of my basement ....... makes it very painful to try and do fab work and body work. I got everything prepped and ran into a slight problem with the windshield motor ...... it hits the cage . I have two choices , one is to notch the cross bar about .25" to allow the motor to pass or , two , just remove it and keep the windshield rainXed . Got it in the final primer coat last night , with the looks of the weather I'm hoping to have it in paint this week end . Seats are on there way and then the frame gets blasted and painted , still looking for harnesses , just can't decide what ones I want. Then I get to clean the dust off all the parts and put it back together.

04-28-2011, 09:44 AM	#47
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	i see the hood line has changed from the first cut and tube fenders ? new fender design or no fender now ? as far as your arm i say stick to the 12oz curls and you wont have any trouble __________________ One of these days Zuk 2.0

04-28-2011, 11:24 AM	#48
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	no fenders , once I put the 60's under it it will not matter anyway :) , I may add a tube that follow the High line , I already added steel plate to the tub so that if I decide to add the tube I have a good attachment point. Takeing a vacation day tomorrow so I might be spraying color Fed Ex says seats will be at the house Sat. morning ....... once there in I can finish the cage and seat mounts and ......... maybe drive it ! And as for the 12 oz curls ...... yes doctor I will take your advise and increase my reps. Last edited by sarge; 04-28-2011 at 11:37 AM.

05-02-2011, 09:31 AM	#49
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	well it's green ....... still waiting on seats, they should be waiting for me at the house when I get off work today .

05-02-2011, 09:51 AM	#50
tom tom tommy Join Date: May 2010 Location: Franklin Oh Posts: 69	that looks nice good job sarge __________________ 08 jeep Sahara soon to be with 33s