yota bulid

tree_bashed_sammy · 11-19-2007, 02:43 AM

i did a bunch of tradin with a guy and what not and for him to build my yota with 1/2 ton chevy axles 304 motor and wire every thing up change cabs put whatever springs in it that i need so basically a whole build and its been like 2 months and what work that has been done to it i have did and he aint did nothin to it or does he want to do anything to it but now he says if i go rent a garage so he can work out of it he will start on it but other things will come before doin my yota and i aint gonna rent a place so he can make money on me i already have a small fortune in it now and aint nothin comin together and i aint wantin to put anymore money in it til something get goin with it so i dunno what to do should i have scrap everything and take my loses or pay again for someone to build it and if i do that i no it will cost another fortune im clueless what to do here just wondered what yall would do in my sitution

fabricator · 11-19-2007, 04:19 AM

build it yourself, I would get it away from that moron.......
what ya want for the toyota axle's

fabricator · 11-19-2007, 04:22 AM

not sure why you want to put the junk GM stuff in there
but if i was you i would either put a 60/14 in it or leave it toyota

94Dodge Truggy · 11-19-2007, 08:00 AM

Quote:

Originally Posted by fabricator

not sure why you want to put the junk GM stuff in there
but if i was you i would either put a 60/14 in it or leave it toyota

I second that idea!

Bear Chow · 11-19-2007, 09:40 AM

That's not the question. Cut your losses and get your things back. Build it yourself or pay a reputable fabricator and write a contract. I believe Carwash will have quite the opinion on this.

carwash · 11-19-2007, 10:06 AM

yes, go there immediatley and get all of your stuff back. Then take it to a reputable shop... i happen to know one.

just count your blessings that his shop isn't 15 hours north, and that it's not $20k in parts that you left there... and that you can actually get ahold of the guy...

PM me if yer looking for a shop to do the work, i have a bay open right now.

KargoMaster · 11-19-2007, 01:22 PM

yes, just count your blessings that you weren't THAT stupid.... hahaha, Just kidding CW.

carwash · 11-19-2007, 02:13 PM

thanks Brad... Live and Learn i guess.

JET455 · 11-19-2007, 02:27 PM

Just thank God you where not stuck in a truck for 2.5 days straight with CW!

carwash · 11-19-2007, 02:35 PM

Quote:

Originally Posted by JET455

Just thank God you where not stuck in a truck for 2.5 days straight with CW!

You loved every minute of it...

JET455 · 11-19-2007, 02:57 PM

Quote:

Originally Posted by carwash

You loved every minute of it...

Yeah was ok till you tried to spoon me....!

fabricator · 11-19-2007, 03:02 PM

too much info.......

carwash · 11-19-2007, 03:50 PM

Quote:

Originally Posted by JET455

Yeah was ok till you tried to spoon me....!

only after you tried to fork me!

94Dodge Truggy · 11-19-2007, 04:38 PM

Someone should try to knife someone sounds like.

Stang849 · 11-19-2007, 05:35 PM

Quote:

Originally Posted by JET455

Yeah was ok till you tried to spoon me....!

Quote:

Originally Posted by carwash

only after you tried to fork me!

I think I hear banjo's firing up!!!!!

tree_bashed_sammy · 11-20-2007, 03:49 AM

i dunno how to weld or i would build it myself

i already sold the axles

i just figured they was ok axles to use and i usin my dana 60 and dana 44 in my jeep eventually

would u have a guess on what u would think of chargin to do it

i gonna get it when i get a new tag on my trailer which should be tomorrow or wednesday

dan · 11-20-2007, 07:43 AM

hey get a hold of me and i will do the welding for you just stop by if you see the jeep

11-19-2007, 02:43 AM	#1
tree_bashed_sammy just a good ol boy Join Date: Feb 2007 Location: dayton ohio Posts: 76	yota bulid i did a bunch of tradin with a guy and what not and for him to build my yota with 1/2 ton chevy axles 304 motor and wire every thing up change cabs put whatever springs in it that i need so basically a whole build and its been like 2 months and what work that has been done to it i have did and he aint did nothin to it or does he want to do anything to it but now he says if i go rent a garage so he can work out of it he will start on it but other things will come before doin my yota and i aint gonna rent a place so he can make money on me i already have a small fortune in it now and aint nothin comin together and i aint wantin to put anymore money in it til something get goin with it so i dunno what to do should i have scrap everything and take my loses or pay again for someone to build it and if i do that i no it will cost another fortune im clueless what to do here just wondered what yall would do in my sitution

11-19-2007, 04:19 AM	#2
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	build it yourself, I would get it away from that moron....... what ya want for the toyota axle's __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

11-19-2007, 04:22 AM	#3
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	not sure why you want to put the junk GM stuff in there but if i was you i would either put a 60/14 in it or leave it toyota __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

11-19-2007, 10:06 AM	#6
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	yes, go there immediatley and get all of your stuff back. Then take it to a reputable shop... i happen to know one. just count your blessings that his shop isn't 15 hours north, and that it's not $20k in parts that you left there... and that you can actually get ahold of the guy... PM me if yer looking for a shop to do the work, i have a bay open right now. __________________

11-19-2007, 01:22 PM	#7
KargoMaster Cleaning off the rust... Join Date: Jan 2007 Location: Cincinnati, OH Posts: 1,009	yes, just count your blessings that you weren't THAT stupid.... hahaha, Just kidding CW. __________________ brad 5.0L \| 435 \| 203 \| 300 \| 4.10 \| 39.5 Buildup BACK underway...

11-19-2007, 09:40 AM	#5
Bear Chow Jeepless Join Date: Feb 2007 Location: Oxford, Oh Posts: 302	That's not the question. Cut your losses and get your things back. Build it yourself or pay a reputable fabricator and write a contract. I believe Carwash will have quite the opinion on this.

11-19-2007, 02:13 PM	#8
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	thanks Brad... Live and Learn i guess. __________________

11-19-2007, 02:27 PM	#9
JET455 Your wifes pimp! Join Date: Jan 2007 Location: Everywhere!!!!!! Posts: 548	Just thank God you where not stuck in a truck for 2.5 days straight with CW! __________________ if i am not currently offending you, i will be shortly.

11-19-2007, 03:02 PM	#12
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	too much info....... __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

11-19-2007, 04:38 PM	#14
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Someone should try to knife someone sounds like.

11-20-2007, 03:49 AM	#16
tree_bashed_sammy just a good ol boy Join Date: Feb 2007 Location: dayton ohio Posts: 76	i dunno how to weld or i would build it myself i already sold the axles i just figured they was ok axles to use and i usin my dana 60 and dana 44 in my jeep eventually would u have a guess on what u would think of chargin to do it i gonna get it when i get a new tag on my trailer which should be tomorrow or wednesday

11-20-2007, 07:43 AM	#17
dan gotta love middletucky Join Date: Jan 2007 Location: Middletown Posts: 106	hey get a hold of me and i will do the welding for you just stop by if you see the jeep