Logo?

tjjeepjeep · 01-24-2009, 10:35 PM

Looking for ideas, thoughts, feedback, whatever....

We are looking to find a logo that we can use on everything from website (if I can figure out how to do that), T shirts (same design every year, only change color), letterheads, biz cards, signs, whatever. So people get used to seeing it, and tie it to us. Ideally something that while new, is a twist on a familar thing (since CORE has been around for a while). Somehow include CORE, what it stands for, and the web site. (I'm asking for the moon, maybe I can get a crater. ;) )

Looking at a few options: We have the one on the website header. Another is the CORE logo (it's attached below for visual) that I think has been around long enough that was in the 2002/2003 CORE Year End Vid, plus last year it was made into smaller ones and are on numerous vehicles now.

So post up some ideas, if you can't draw it ... just type it, someone can turn it into a pic that we can work with. Bring it on..

JasonCJ7 · 01-24-2009, 11:42 PM

I like the logo from the very first tshirt I got, it is a the stuck sticker with some sort of swamper tracks. Just thought of something else.

wilson1010 · 01-25-2009, 11:13 AM

Of course, Lisa, the problem is in the methodology. What works best is to figure out what you stand for and then pick a name that fits that concept and then the logo is easy. If you start with the name, you have to try to find a good connection to what you stand for and then try to fit a logo to that connection.

I tried to explore that concept with our founder, Ed, who didn't see the irony in the name "Terrain Stompers" for a club that was embracing responsible wheeling as its mission.

He had picked the name first, concept second. Oh well, it stimulates lively discussion with the green weenies who would like us not to wheel at all.

I like the connection to welding since welding rods often have a core and there is core welding and core wire and the like. And, best of all, a welding arc or a torch flame makes for a great image. And, of course, most of your rigs have extensive fabrication. So, I'd go with the welding angle.

sarge · 01-25-2009, 11:59 AM

I thought we already had one , the round multi-colored one :confused: I have the image but not on this computer .

here I found it :

tjjeepjeep · 01-25-2009, 12:19 PM

Sarge -- True on that one, but I'm gonna say it's not 'widely known' and the website shown on it is out of date (for a couple years I believe). Ok and truth be known, I'm not really fond of it.

maddhatter · 01-25-2009, 01:43 PM

I've always liked the "Bogger trax" like at the top of this page myself.

SixFtUnd · 01-25-2009, 02:06 PM

Quote:

Originally Posted by maddhatter

I've always liked the "Bogger trax" like at the top of this page myself.

yeh I like the bogger trax too

kb9qdi · 01-25-2009, 10:11 PM

Here's a quickie from me. I'm not a member but I enjoyed making it :)

94Dodge Truggy · 01-25-2009, 11:05 PM

Nice work!

kb9qdi · 01-25-2009, 11:19 PM

Quote:

Originally Posted by 94Dodge Truggy

Nice work!

Thanks......I had fun making it

maddhatter · 01-26-2009, 01:57 PM

Quote:

Originally Posted by 94Dodge Truggy

Nice work!

X2!

SixFtUnd · 01-27-2009, 08:01 PM

what if you put the tred behind C.O.R.E. like on the page ?

Flxratd · 01-28-2009, 03:43 PM

im going to be bringing a couple ideas to the meeting monday for the people who show to check out and see if anything catches anybodys attention as to something that is here to stay

01-24-2009, 11:42 PM	#2
JasonCJ7 Throttle Jockey Join Date: Jan 2007 Location: Liberty Twp., Ohio Posts: 182	I like the logo from the very first tshirt I got, it is a the stuck sticker with some sort of swamper tracks. Just thought of something else. __________________ 78 CJ-7, 350 V8, T-18a Tranny, Twin Stick Dana 300, Scout 44's, 4.27 Gears, 36" TSL's, Welded rear and Full Spool Front, Hi-Steer with GM Knuckles

01-25-2009, 11:13 AM	#3
wilson1010 Join Date: Feb 2007 Posts: 147	Of course, Lisa, the problem is in the methodology. What works best is to figure out what you stand for and then pick a name that fits that concept and then the logo is easy. If you start with the name, you have to try to find a good connection to what you stand for and then try to fit a logo to that connection. I tried to explore that concept with our founder, Ed, who didn't see the irony in the name "Terrain Stompers" for a club that was embracing responsible wheeling as its mission. He had picked the name first, concept second. Oh well, it stimulates lively discussion with the green weenies who would like us not to wheel at all. I like the connection to welding since welding rods often have a core and there is core welding and core wire and the like. And, best of all, a welding arc or a torch flame makes for a great image. And, of course, most of your rigs have extensive fabrication. So, I'd go with the welding angle. __________________ Unimog 406 XJ with a bunch of stuff put on by somebody else

01-25-2009, 12:19 PM	#5
tjjeepjeep Just tired Join Date: Apr 2007 Location: Hamilton, OH Posts: 2,213 Images: 2212	Sarge -- True on that one, but I'm gonna say it's not 'widely known' and the website shown on it is out of date (for a couple years I believe). Ok and truth be known, I'm not really fond of it. __________________ I want to be the reason you look down at your phone and smile........then walk into a pole.

01-25-2009, 11:05 PM	#9
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	Nice work! __________________

01-27-2009, 08:01 PM	#12
SixFtUnd Danny Beach Join Date: Jan 2008 Location: Cincinnati OH ( Price Hill) Posts: 481	what if you put the tred behind C.O.R.E. like on the page ? __________________ 86 Ford Bronco

01-25-2009, 11:59 AM	#4
sarge Pure Bacon Join Date: Jan 2007 Location: Trenton, Oh Posts: 1,098	I thought we already had one , the round multi-colored one :confused: I have the image but not on this computer . here I found it :

01-25-2009, 01:43 PM	#6
maddhatter Join Date: May 2007 Location: loveland OH Posts: 324	I've always liked the "Bogger trax" like at the top of this page myself.

01-25-2009, 10:11 PM	#8
kb9qdi Storm Chaser Join Date: Oct 2007 Location: Harrison,Ohio Posts: 142	Here's a quickie from me. I'm not a member but I enjoyed making it :)

01-28-2009, 03:43 PM	#13
Flxratd Retired Join Date: May 2008 Location: Hamilton/Ross Posts: 645	im going to be bringing a couple ideas to the meeting monday for the people who show to check out and see if anything catches anybodys attention as to something that is here to stay __________________ One of these days Zuk 2.0