77cj7, 5.3,linked, BUILT...

jwend · 08-09-2011, 12:35 PM

Dana 60 front with spartan locker yukon cromos and Rpm slugs high steer arms with btf truss and full hydro with derail fan cooled cooler, linked with 8 1 1/4 hiems 2inch upper and lowers all set up by ruff stuff tabs and brackets 16 in fox airs 4.10

14 bolt rear with btf truss Overson mini spool, ruff stuff caliper brackets and 85 chev calipersLinked with all Johnny joints. 2 1/2 lowers 2 inch uppers to Gen right 4 link frame mount. 18 in fox airs 4.10

Tom Woods custom shafts

np205 transfer

th400 with a art car winters gate shifter with derail fan cooled cooler

05 70k mile chevy 5.3 with new jegs radiator shroud and fan

corvette master cylinder brake set up

CW built front bumper stinger and winch mount

Rear half of frame cut off and custom frame and bumper installed

Full roll cage tied to frame with seats tied to cage 3 prp high back comp seats and a preme seat for a kid, all with 5 point harnesses

It will come with a cb radio and wake board speakers

the dash has all auto meter gauges oil pressure water temp, fuel level, volts and fuel pressure. 12 fused switches.

The list on this thing goes on and on and on.. there was no cost spared in building this thing all high end parts and done right I love this thing and it pains me to sell it but I have things that are more important to take care of at this point.

build thread http://www.pirate4x4.com/forum/showt...ht=buckminster

Alot has been done since the last update on the thread.. fourlinked front, full hydro,5.3,th400 to np205. I have to get pics of it with it finished now will by this weekend. it is 90% complete just needs to be finish wired to dash and plumbed, I have all the parts just need to get it done... Buy it as is for 24000.00 or finished for 26000.00 comes with a brand new 18 foot dove tail car hauler also..have titles for both jeep and trailer

Located in Northern Kentucky just out side of cincinnati.. 859-609-5356

94Dodge Truggy · 08-09-2011, 04:02 PM

entertaining trades? You out of the hobby?

jwend · 08-09-2011, 04:43 PM

Quote:

Originally Posted by 94Dodge Truggy

entertaining trades? You out of the hobby?

what ya wanting to trade.. you are NEVER out of this hobby

jwend · 08-09-2011, 10:04 PM

I am motivated to move this thing.. so if you are interested don't be afraid to make me a offer... i will entertain trades on rzr, another streetable jeep, a smaller two seater v8 buggy, a large enclosed trailer anything of equal value that would be easier to sell. Dont be retarded some trades will have to have cash also..

94Dodge Truggy · 08-09-2011, 10:19 PM

you bringing it to the benefit?

jwend · 08-09-2011, 10:21 PM

i wish i could.. i am super busy and it wont be done yet... it is killing me..

boomhauer · 08-10-2011, 01:01 AM

how about 5 grand?

on another note...please call me. i have ? for you b4 you sell.

jwend · 08-12-2011, 03:15 PM

Boom, sorry i been slammed busy..... Its all staying together either it sells as is or i will beat the bolts out of it.... bump for offers??? or interest to come see

jwend · 09-14-2011, 04:59 PM

I will make a real good deal on this thing if someone wants it as is!! call me

carwash · 09-14-2011, 09:55 PM

What would you call a real good deal?

jwend · 10-10-2011, 10:28 PM

19000.00 obo i want it out of my garage

WrenchMonkey · 10-11-2011, 01:15 AM

The pirate link appears dead...

WAY outta my league anyway, just sayin...

Good luck with it!

Robert

jwend · 11-03-2011, 12:36 PM

Ok, I am still wanting to sell this thing.. I came up with a part out price of what i would sell all the parts for.. I willl take 17500 for this thing as it sits if it is gone in the next 60 days.. If not i am going to part out the parts i dont want and keep what i do.. dont ask for parts untill the 60 days is up then i will post a list of whats going and the prices. Just a side note i do not need to sell this thing i want to.. so hold on to the crazy low ball offers

call or text 8596095356

humpy · 11-03-2011, 12:52 PM

price on shocks??

jwend · 11-03-2011, 12:55 PM

i was wondering who would be first, haha..

humpy · 11-03-2011, 01:02 PM

I had too lol

mckeddie · 11-03-2011, 01:33 PM

Humpy, just buy the whole thing, or trade him your truck straight across.

humpy · 11-03-2011, 02:12 PM

ill trade my chevy for it lol..then sell the jeep tub and build something cool out of the parts..lol

jwend · 11-03-2011, 03:13 PM

hahaha the tub is about all you would get

humpy · 11-03-2011, 04:34 PM

Your overpriced lol

jwend · 11-08-2011, 06:53 PM

any reasonable offers?? i will consider trades.. even or with cash.. i am working on getting it finished just needs drive shafts brakelines and air in the shocks just have to find the time.

huntingmatt418 · 11-08-2011, 08:39 PM

Pics? Link not working

jwend · 11-08-2011, 08:50 PM

http://www.pirate4x4.com/forum/showt...139&highlight=

carwash · 11-08-2011, 10:50 PM

Fun pics... seems like 10 years ago to me now... so much has happened since then.

jwend · 11-09-2011, 12:53 PM

Yeah building it with you was as much fun or more than ever wheeling it.

08-09-2011, 12:35 PM	#1
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	77cj7, 5.3,linked, BUILT... Dana 60 front with spartan locker yukon cromos and Rpm slugs high steer arms with btf truss and full hydro with derail fan cooled cooler, linked with 8 1 1/4 hiems 2inch upper and lowers all set up by ruff stuff tabs and brackets 16 in fox airs 4.10 14 bolt rear with btf truss Overson mini spool, ruff stuff caliper brackets and 85 chev calipersLinked with all Johnny joints. 2 1/2 lowers 2 inch uppers to Gen right 4 link frame mount. 18 in fox airs 4.10 Tom Woods custom shafts np205 transfer th400 with a art car winters gate shifter with derail fan cooled cooler 05 70k mile chevy 5.3 with new jegs radiator shroud and fan corvette master cylinder brake set up CW built front bumper stinger and winch mount Rear half of frame cut off and custom frame and bumper installed Full roll cage tied to frame with seats tied to cage 3 prp high back comp seats and a preme seat for a kid, all with 5 point harnesses It will come with a cb radio and wake board speakers the dash has all auto meter gauges oil pressure water temp, fuel level, volts and fuel pressure. 12 fused switches. The list on this thing goes on and on and on.. there was no cost spared in building this thing all high end parts and done right I love this thing and it pains me to sell it but I have things that are more important to take care of at this point. build thread http://www.pirate4x4.com/forum/showt...ht=buckminster Alot has been done since the last update on the thread.. fourlinked front, full hydro,5.3,th400 to np205. I have to get pics of it with it finished now will by this weekend. it is 90% complete just needs to be finish wired to dash and plumbed, I have all the parts just need to get it done... Buy it as is for 24000.00 or finished for 26000.00 comes with a brand new 18 foot dove tail car hauler also..have titles for both jeep and trailer Located in Northern Kentucky just out side of cincinnati.. 859-609-5356 __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

08-09-2011, 04:02 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	entertaining trades? You out of the hobby? __________________

08-09-2011, 10:04 PM	#4
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	I am motivated to move this thing.. so if you are interested don't be afraid to make me a offer... i will entertain trades on rzr, another streetable jeep, a smaller two seater v8 buggy, a large enclosed trailer anything of equal value that would be easier to sell. Dont be retarded some trades will have to have cash also.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

08-09-2011, 10:19 PM	#5
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	you bringing it to the benefit? __________________

08-09-2011, 10:21 PM	#6
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	i wish i could.. i am super busy and it wont be done yet... it is killing me.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

08-10-2011, 01:01 AM	#7
boomhauer Join Date: Mar 2008 Posts: 188	how about 5 grand? on another note...please call me. i have ? for you b4 you sell. __________________ 95 yj, fresh fuel injected 302, c-6, twin sticked 205, 3 linked high pinion d60 front, double trianulated 4 linked 14 bolt rear (all aluminum links) locked both ends, 4:56 gears, full hydro steering, high steer, 4 wheel discs, 16" 2.5 fox air shocks, 39.5" irok's. just finishing a full frame-up redo thanks to a great friend and one knowledgable(sp?) s.o.b casey cravens for without him this could not have been done in such a short time and done right! LOOK OUT "WHITEY" HERE I COME!!!

08-12-2011, 03:15 PM	#8
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Boom, sorry i been slammed busy..... Its all staying together either it sells as is or i will beat the bolts out of it.... bump for offers??? or interest to come see __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

09-14-2011, 04:59 PM	#9
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	I will make a real good deal on this thing if someone wants it as is!! call me __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

09-14-2011, 09:55 PM	#10
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	What would you call a real good deal? __________________

10-10-2011, 10:28 PM	#11
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	19000.00 obo i want it out of my garage __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

10-11-2011, 01:15 AM	#12
WrenchMonkey Mechanical Animal - CORE Member - - Moderator - Join Date: Feb 2008 Location: Beechmont Posts: 1,883	The pirate link appears dead... WAY outta my league anyway, just sayin... Good luck with it! Robert __________________ DIRTY DEEDS, DONE DIRT CHEAP Whatever doesn't kill you makes you stranger

11-03-2011, 12:36 PM	#13
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Ok, I am still wanting to sell this thing.. I came up with a part out price of what i would sell all the parts for.. I willl take 17500 for this thing as it sits if it is gone in the next 60 days.. If not i am going to part out the parts i dont want and keep what i do.. dont ask for parts untill the 60 days is up then i will post a list of whats going and the prices. Just a side note i do not need to sell this thing i want to.. so hold on to the crazy low ball offers call or text 8596095356 __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad: Last edited by jwend; 11-03-2011 at 01:49 PM.

11-03-2011, 12:52 PM	#14
humpy Join Date: Sep 2008 Posts: 573	price on shocks?? __________________ S10 with a few air shocks..

11-03-2011, 12:55 PM	#15
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	i was wondering who would be first, haha.. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-03-2011, 01:02 PM	#16
humpy Join Date: Sep 2008 Posts: 573	I had too lol __________________ S10 with a few air shocks..

11-03-2011, 01:33 PM	#17
mckeddie Join Date: Apr 2007 Location: van wert oh Posts: 583	Humpy, just buy the whole thing, or trade him your truck straight across. __________________ zuk buggy.....it'll be a jeep eventually.

11-03-2011, 02:12 PM	#18
humpy Join Date: Sep 2008 Posts: 573	ill trade my chevy for it lol..then sell the jeep tub and build something cool out of the parts..lol __________________ S10 with a few air shocks..

11-03-2011, 03:13 PM	#19
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	hahaha the tub is about all you would get __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-03-2011, 04:34 PM	#20
humpy Join Date: Sep 2008 Posts: 573	Your overpriced lol __________________ S10 with a few air shocks..

11-08-2011, 06:53 PM	#21
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	any reasonable offers?? i will consider trades.. even or with cash.. i am working on getting it finished just needs drive shafts brakelines and air in the shocks just have to find the time. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-08-2011, 08:39 PM	#22
huntingmatt418 Join Date: Sep 2008 Location: Middletown, OH Posts: 57	Pics? Link not working

11-08-2011, 08:50 PM	#23
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	http://www.pirate4x4.com/forum/showt...139&highlight= __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad:

11-08-2011, 10:50 PM	#24
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	Fun pics... seems like 10 years ago to me now... so much has happened since then. __________________

11-09-2011, 12:53 PM	#25
jwend Did I offend you? Join Date: Feb 2010 Location: Independence, ky Posts: 544	Yeah building it with you was as much fun or more than ever wheeling it. __________________ Dont look @ me in that tone of voice or I WILL PUNCH YOU IN THE SHIRT! :mad: