Who can bend 12/14ga. sheet?

TomH · 04-10-2012, 12:56 PM

I am planning a project that will need some sheet (12-14 ga.) bent along a 60" edge. (60"x60"x4" pan and 57"x57"x6" pan) I just need the bends and will weld it here. Also, don't need a pan break, but...

Any of the area steel yards do this? Any steel fab shops?

Thanks.

94Dodge Truggy · 04-11-2012, 01:00 PM

I can only go 52".

fabricator · 04-11-2012, 03:15 PM

Spring grove sheet metal
(513) 621-5584

TomH · 04-11-2012, 03:53 PM

Thanks!

carwash · 04-11-2012, 04:50 PM

Quote:

Originally Posted by fabricator

Spring grove sheet metal
(513) 621-5584

These guys rule, have made some weird **** for me in the past...

TomH · 04-11-2012, 05:54 PM

Thanks. Great info.

PS,
Assuming this project goes through, I may hit you up for tube. 3x3x.25 and 2x2x.25

Do you do sheet as well?

carwash · 04-11-2012, 06:00 PM

No deals on sheet, i wish tho. Let me know what you need.

04-10-2012, 12:56 PM	#1
TomH Gearhead Join Date: Mar 2008 Location: Anderson Posts: 95	Who can bend 12/14ga. sheet? I am planning a project that will need some sheet (12-14 ga.) bent along a 60" edge. (60"x60"x4" pan and 57"x57"x6" pan) I just need the bends and will weld it here. Also, don't need a pan break, but... Any of the area steel yards do this? Any steel fab shops? Thanks.

04-11-2012, 01:00 PM	#2
94Dodge Truggy EX-Vice President Join Date: Jan 2007 Location: Fairfield, Ohio Posts: 3,048	I can only go 52". __________________

04-11-2012, 03:15 PM	#3
fabricator Join Date: Jan 2007 Location: Cincy, Oh Posts: 947	Spring grove sheet metal (513) 621-5584 __________________ For you guys who can't drive, I have owned a frame rack for several years. Prices are based on your skill and ability to wreck it....

04-11-2012, 06:00 PM	#7
carwash pimpin' IS easy Join Date: Jan 2007 Location: Union, KY Posts: 3,344 Images: 605	No deals on sheet, i wish tho. Let me know what you need. __________________

04-11-2012, 03:53 PM	#4
TomH Gearhead Join Date: Mar 2008 Location: Anderson Posts: 95	Thanks!

04-11-2012, 05:54 PM	#6
TomH Gearhead Join Date: Mar 2008 Location: Anderson Posts: 95	Thanks. Great info. PS, Assuming this project goes through, I may hit you up for tube. 3x3x.25 and 2x2x.25 Do you do sheet as well?